Catalog

Warning! You must be logged in to download documents. If not, you will be redirected to the login page

WB SERIES

WALL BOX 1 SOCKET 3A

Type 3A 1P+N+E 16A 230V~ 3,7kW 16A 230V 1P+N+E IP54 IK08

Cod. 204.WB11P-3A

Out of Production

Wall Box made of thermoplastic material, for wall mounting, equipped with 1 Type 3A 1P+N+T 16A 230 Vac 3.5 kW socket with safety shutter in compliance with IEC/EN 62196-2 Suitable for charging electric vehicles in «mode 3» in compliance with EN61851-1. Version for charging at home in total safety Compact and captivating design made of special technopolymer highly resistant to UVA rays, high degree of protection against dust and water (IP54). Possibility of accessorising the station with pole support and galvanised steel plate

Commercial Series

WB Series

Synthetical description

WALL BOX 1 SOCKET 3A

Material

ENGINEERING PLASTIC

Rated current

16A

Rated voltage

230V

Working frequency

50/60Hz

Poles

1P+N+E

Protection degree IP

IP54

Working temperature

-25°C/+40°C

GLOW WIRE

GW 650°C

Protection degree IK

IK08

Colour

GREY

Saline solution

Resistant

UV protection

UV resistant

Mounting version

SURFACE MOUNTING

Dimensions

215x350x120mm

Product

EAN code

8001636300429

INTRASTAT code

8537109899

Net weight

2.709 KG

Minimum Quantity

Packaging

Packaging Box

Quantity

EAN code

Depth

353.0 MM

Width

263.0 MM

Height

165.0 MM

Volume

15318.435 CCM

DIRECTIVE EMC 2014/30/UE	[European Directives] Electromagnetic Compatibility Directive
DIRECTIVE LOW VOLTAGE 2014/35/UE	[European Directives] Low Voltage Directive
EN IEC 61851-1 (2019)	[European Standard] Electric vehicle conductive charging system - Part 1: General requirements
IEC 61439-7 (2018)	[International Standard] Low-voltage switchgear and controlgear assemblies - Part 7: Assemblies for specific applications such as marinas, camping sites, market squares, electric vehicle charging stations

Version

SOLO

EV standard

Type 3A 1P+N+E 16A 230V~ 3,7kW

EV functions

charge in mode 3 with pwm circuit pilot

predisposition for serial communication

protection against direct contact Safety Child Shutters

protection against overcurrents and electric shock

working in mode stand-alone free

current consuption metering

EV equipment

1 terminal strip 1x6mm²

1 power supply 24Vdc 36W

1 fuse holder 1P+N gG 4A

1 DC Leakage detector

1 control card

1 stop charge push-button (mode free)

1 current transformer

1 couple of service led

1 modular contactor 2P 25A 24Vdc

1 circuit breaker 1P+N D20 30mA ist. A

EV excluded

emergency line 24Vdc (optional)

EV specifications

Charging station for electric vehicles with wall installation (or on a pole) made of grey technopolymer resistant to impact and UV rays, IP54 degree of protection, size 215 x 350 x 123 mm.Container with status LED. Station equipped with a type 3A socket with a protective shutter compliant with the CEI EN 62196-2 standard and suitable for charging in mode 3 in compliance with the CEI EN 61851-1 standard (IPXXD degree of protection is guaranteed without further disconnecting devices). Maximum deliverable current 16 A single-phase (3.5 kW). Station complete with both automatic and differential protection devices. Operation in stand-alone FREE mode and STOP button to end the charge. Operating temperature -25°C to +40°C, IK07 impact resistance. Possibility of accessorising the station with pole support and galvanised steel plate. Compliant with CEI EN 61851-1, CEI EN 62196-2, CEI EN 61439-7, CEI EN 60304-7-722 standards and complete with CE marking.

Technical drawing [PDF]

Technical drawing [STP]

InfoTECH - Detailed Data Sheet [IT]

InfoTECH - Detailed Data Sheet [EN]

Technical drawing [DWG]