Catálogo

Warning! You must be logged in to download documents. If not, you will be redirected to the login page

SERIE CR

COLUMNA CR 4 BASES CON BLOQUEO

Type 2 1P+N+T 32A 230V~ 7,4kW 32A 400V 3P+N+T IP54 IK10

Cod. 204.CR41B-002

Fuera de Producción

COR-TEN steel column equipped with 2 Type 2 1P+N+T 32A 230 Vac 7 kW sockets and 2 Type 3A 1P+N+T 16A 230 Vac 3.5 kW sockets with safety shutters in compliance with IEC/EN 62196-2 Suitable for charging electric vehicles in «mode 3» in compliance with IEC/EN 61851-1. It is particularly suited for installation in public places. Equipped with RFID Card for user identification and management. Allows the simultaneous charging of four vehicles Environmentally friendly charging station (suited for historical city centres) with sockets equipped with special plug locking system and with exclusive anti-vandal access system (Type 2). Customisable panel, resistant to UVA rays, high degree of protecti

Serie comercial

Serie CR

Descripción

COLUMNA CR 4 BASES CON BLOQUEO

Material

METAL BARNIZADO

Intensidad nominal

32A

Tensión nominal

400V

Frecuencia nominal

50/60Hz

Polos

3P+N+T

Grado de protección IP

IP54

Temperatura de ejercicio

-25°C/+40°C

Grado de protección IK

IK10

Solución salina

Resistente

UV protection

UV resistant

Tipo de instalación

TORRETA

Dimensiones

450x1670x470mm

Product

EAN code

8001636303604

INTRASTAT code

8537109899

Net weight

71.5 KG

Cantidad mínima

DIRECTIVE EMC 2014/30/UE	[European Directives] Electromagnetic Compatibility Directive
IEC 61439-7 (2018)	[International Standard] Low-voltage switchgear and controlgear assemblies - Part 7: Assemblies for specific applications such as marinas, camping sites, market squares, electric vehicle charging stations
DIRECTIVE LOW VOLTAGE 2014/35/UE	[European Directives] Low Voltage Directive
EN IEC 61851-1 (2019)	[European Standard] Electric vehicle conductive charging system - Part 1: General requirements

Versión

BUSINESS

EV standard

Type 2 1P+N+T 32A 230V~ 7,4kW

EV capitolato

Environmentally friendly charging station for electric vehicles with floor installation via trapezoidal COR-TEN steel base acting as a condensation separation chamber, equipped with studs on which to fix the column using M8 nuts. COR-TEN steel structure with back panel customisable with customer logo or brand. Column equipped with four sockets: two type 2 anti-vandal and two type 3A with protective shutters compliant with the CEI EN 62196-2 standard and suited for charging in mode 3 in compliance with the CEI EN 61851-1 standard (IPXXD degree of protection is guaranteed without further disconnecting devices). Sockets equipped with plug locking system and interlocking of the cover to prevent tampering and unauthorised access. Maximum deliverable current 32 A three-phase (22 kW) with identification of the connected cable size for the type 2 sockets and 16 A single-phase (3.5 kW) for the type 3A sockets. Column complete with automatic and differential protection devices (type B for three-phase socket) and digital meter for the measurement of the energy delivered and the control of the absorbed current. Column equipped with a coin box with service management depending on the coins deposited (timed charge). Touchscreen for displaying messages and managing diagnostics, backup batteries to ensure continuity of the service in the event of power loss. Set up for communication on RS485 serial line. Operating temperature -25°C to +40°C, IK10 impact resistance, casing with IP54 degree of protection. Compliant with CEI EN 61851-1, CEI EN 62196-2, CEI EN 61439-7, CEI EN 60304-7-722 standards and complete with CE marking.

InfoTECH - Ficha Técnica Detallada [EN]

Esquema eléctrico

InfoTECH - Ficha Técnica Detallada [IT]