- Domestic 637496
- Blister 637751
- Domestic adaptors 637748
- Domestic cable reels 637749
- Domestic multiple sockets 637753
- Domestic plugs and sockets 637747
- Lamp holders and chamfer switches 637750
- TV/Data 637752
- Wiring devices 637754
- BASIC (8000) Series 637942
- EVOLUTION Series 637943
- EVOLVE Series 637940
- FUTURA Series 637936
- GEA Series 637938
- GLENO Series 637939
- INNOVA Series 637931
- KOMPAS Series 637932
- LUXURY Series 637935
- METALCLAD Series 637941
- MIA Series 637946
- NEXTA Series 637934
- OPERA Series 637930
- PAVIBOX Series 637937
- PROTECTA Series 637933
- UNIBOX Series +EVOLUTION 637944
- UNIBOX Series +EVOLVE 637945
- E-Mobility 637500
- AC charging stations 638302
- Charging cables 638299
- Connection 638301
- DC charging stations 638303
- E-bike charging stations 638300
- Hazardous areas Ex 637499
- Industry 637497
- Distribution assemblies 638406
- Empty enclosures 638400
- High currents industrial plugs and sockets 638399
- IOT Interlocked sockets 638409
- Industrial Plugs and Sockets 638401
- Accessories for plugs and sockets 639737
- Connectors 639743
- Domestic socket outlets 639739
- Flush mounting appliance inlets 639741
- Flush mounting socket outlets 639745
- Plugs 639740
- Plugs and sockets for specific applications 639746
- Surface mounting appliance inlets 639742
- Surface mounting socket outlets 639744
- Surface mounting socket outlets with switch 639738
- Industrial adaptors 638407
- Industrial cable reels 638408
- Light fittings 638404
- Multipolar connectors 638405
- Switched interlocked socket outlets 638402
- Switchgears 638403
- Installation 637498
IP degree
Degrees of protection for enclosures
The IEC / EN 60529 Standard establishes a classification system for the degrees of protection of enclosures for electrical equipment whose rated voltage does not exceed 72.5 kV.
Its purpose is to specify the degree of protection of electrical equipment enclosures, the designation of these degrees of protection, the requirements for each designation and the verification tests.
According to these Standard, the IP degree of protection should be used exclusively with the 2 defining numbers and the additional letters. These are defined as follows:
Its purpose is to specify the degree of protection of electrical equipment enclosures, the designation of these degrees of protection, the requirements for each designation and the verification tests.
According to these Standard, the IP degree of protection should be used exclusively with the 2 defining numbers and the additional letters. These are defined as follows:
1ST NUMBER
Protection for people from contact with hazardous parts (see also ADDITIONAL LETTER) and protection of equipment from the entry of solid foreign bodies.
2ND NUMBER
Protection of equipment from water entry.
ADDITIONAL LETTER
To be used when the protection of people from hazardous parts is higher than that demanded by the first number for protection from the entry of solid objects.
SUPPLEMENTARY LETTER
Used to supply additional information about the material.
