Catalog

Warning! You must be logged in to download documents. If not, you will be redirected to the login page

CA SERIES

PILLAR CA 2 SOCKETS WITH LOCK

DE 2P+E 16A 230V~ 3,7kW 16A 400V 3P+N+E IP54 IK10

Cod. 204.CA21B-UNUN

Out of Production

Painted steel column equipped with 2 GERMAN (domestic) 1P+N+T 16A 230 Vac 3.5 kW sockets in compliance with IEC/EN 62196-2 Suitable for charging electric vehicles in «mode 1» in compliance with IEC/EN 61851-1. Particularly suited for installation in environments where mode 3 is not mandatory. Equipped with RFID Card for user identification and management Charging station with sockets having a plug locking system to prevent accidental removal, realised by locking the lid opening even when the plug is inserted. Customisable panel, resistant to UVA rays, high degree of protection against dust and water (IP54

Commercial Series

CA Series

Synthetical description

PILLAR CA 2 SOCKETS WITH LOCK

Material

VARNISHED METAL

Rated current

16A

Rated voltage

400V

Working frequency

50/60Hz

Poles

3P+N+E

Protection degree IP

IP54

Working temperature

-30°C/+50°C

Protection degree IK

IK10

Colour

GREY

Saline solution

Resistant

UV protection

UV resistant

Mounting version

ON TURRET

Dimensions

385x1510x263mm

Product

EAN code

8001636290393

INTRASTAT code

8537109899

Net weight

46.6 KG

Minimum Quantity

EN 61439-3 (2012-04)	[European Standard] Low-voltage switchgear and controlgear assemblies - Part 3: Distribution boards intended to be operated by ordinary persons (DBO)
DIRECTIVE LOW VOLTAGE 2014/35/UE	[European Directives] Low Voltage Directive
DIRECTIVE EMC 2014/30/UE	[European Directives] Electromagnetic Compatibility Directive

Version

BUSINESS

EV standard

DE 2P+E 16A 230V~ 3,7kW

HMI (Human-Machine Interfaces)

LCD 2x20 char

User authentication

RFID authentication

Connectivity

None

EV functions

protection against overcurrents and electric shock

predisposition for serial communication

energy metering and current consumption

identification of authorized user

working in mode stand-alone free or personal

protection against direct contact Safety Child Shutters

charge managing in case of power outage

managing of lid locking and latching system

EV equipment

1 base with separation chamber

1 power supply 24Vdc 36W

1 fuse holder 1P+N gG 4A

1 backup battery

2 control cards

2 stop charge push-buttons (mode free)

2 lcd display 2x20 rows backlight

2 readers RFID 13,56MHz

1 lighting head in translucent and RGB led

1 terminal strip 5x35mm²

1 couple of front panels in polycarbonate

1 main switch 4P 40A

2 circuit breakers 1P+N D20 30mA ist. A

2 digital energy meters 1P+N 40A

2 modular contactors 2P 20A 24Vdc

EV specifications

Pillar in painted galvanized steel prepared for floor installation with basement with function of anti-condensation separation room. RGB LED light head with three colours indicating the station's operating status. Front panels in polycarbonate with the possibility of customization with the customer's logo or brand. Equipped with: 2 German sockets type (domestic), equipped with shutter protection (IPXXD degree of protection without any additional devides), lockable lid even with plug inserted to avoid unintentional withdraw, maximum supply current 16A single-phase 230Vac (3,7kW), the use of this sockets is allowed only in areas where is not compulsory the mode 3. Complete with: Automatic and residual current device for protection against over currents and indirect contact. Digital meter for the measurement of the energy delivered and the control of current cosumption. Backup batteries to ensure continuity of service in the case of power outage. «Save Unlock» system to ensure the possibility of extracting the connector in the event of a blackout. RFID reader for user identification and management of the charge, working in FREE or PERSONAL stand-alone mode. LCD backlit display 2x20 character, for messages and diagnostic management with the possibility to change the language through the button. Push button for display language changing and STOP to end the charge and allow plug extraction in FREE mode. Set up for communication over RS485 serial line (NET mode with management via server). Operating temperature -30°C to +50°C. Impact resistance IK10. Enclosure with IP54 degree of protection. Compliant with EN 61439-3 standards and complete with CE marking.

Technical drawing [PDF]

Technical drawing [STP]

Technical drawing [DWG]