Catálogo

¡Advertencia! Para poder descargar la documentación, debes haber iniciado sesión, ingresando tu nombre de usuario y contraseña. De lo contrario, será redirigido a la página de inicio de sesión.

SERIE BE-W

WALL BOX CABLE+BASE T2

Type 2 1P+N+E 16A 230V~ 3,7kW 16A 230V 1P+N+E IP54 IK08 Type 2 4m

Cod. 205.W11-R0

Fuera de Producción View replacement product Wall Box in Halogen-free engineering plastics, for wall assembly, equipped with Type 2 connector, 1P+N+PE 16A 230 Vac 3.7 kW, with IPXXD protection in compliance with standard IEC/EN 62196-2 and incorporated Residual Current Circuit Breaker Overcurrent Protection (RCBO) Suitable for electric vehicle charging in «mode 3» in compliance with standard EN61851-1. BASIC-FREE version ideal for domestic charging in total safety Exclusive design with «dual Feel Sensitive» finish, highly resistant to UV rays, high-level IP54 protection against dust and water with the possibility for personalisation.
Including cable holder in anthracite technopolymer.

Serie comercial

Serie BE-W

Descripción

WALL BOX CABLE+BASE T2

Material

POLÍMERO TÉCNICO

Longitud cable

Sección del cable

3G2,5+1x0,5mm²

Intensidad nominal

16A

Tensión nominal

230V

Frecuencia nominal

50/60Hz

Polos

1P+N+T

Grado de protección IP

IP54

Temperatura de ejercicio

-30°C/+50°C

Prueba del hilo incandescente

GW 650°C

Grado de protección IK

IK08

Color

GRIS OSCURO

Solución salina

Resistente

UV protection

UV resistant

Tipo de instalación

MURAL

Dimensiones

235x370x115mm

Catalogue notes

Completa con soporte de cable.

Product

EAN code

8001636039404

INTRASTAT code

8537109899

Net weight

4.262 KG

Cantidad mínima

Packaging

Packaging Carton

Quantity

EAN code

8001636039404

Depth

628.0 MM

Width

440.0 MM

Height

207.0 MM

Volume

57198.24 CCM

DIRECTIVE EMC 2014/30/UE	[European Directives] Electromagnetic Compatibility Directive
IEC 61439-7 (2018)	[International Standard] Low-voltage switchgear and controlgear assemblies - Part 7: Assemblies for specific applications such as marinas, camping sites, market squares, electric vehicle charging stations
DIRECTIVE LOW VOLTAGE 2014/35/UE	[European Directives] Low Voltage Directive
EN IEC 61851-1 (2019)	[European Standard] Electric vehicle conductive charging system - Part 1: General requirements

Versión

SOLO

EV standard

Type 2 1P+N+T 16A 230V~ 3,7kW

Con cable integrado

Tipo 2

EV funciones

charge in mode 3 with pwm circuit pilot
predisposition for serial communication
protection against overcurrents and electric shock
power contactor aperture monitoring
working in mode stand-alone free
current consuption metering

EV equipo

1 power supply 24Vdc 36W
1 fuse holder 1P+N gG 4A
1 DC Leakage detector
1 RBG led stripes
1 stop charge push-button (mode free)
1 control card
1 cable holder in technopolymer
1 shunt trip release 24Vdc
1 terminal strip 3x10mm²
1 current transformer
1 modular contactor 2P 25A 24Vdc
1 circuit breaker 1P+N D20 30mA ist. A
1 cable 3G2,5+1x0,5mm² 4m

EV capitolato

Wall mounting box in thermoplastic material halogen free resistant to impact and UV rays. Equipped with: 1 connector Type 2 in compliance with IEC/EN 62196-2 for mode 3 charging and case C (mobile connector with cable) in compliance with IEC/EN 61851-1, maximum supply current 16A single-phase 230Vac (3,7kW). Complete with: Automatic and residual current device for protection against over currents and indirect contact. Current tranfromer for the control of current cosumption. Control system for power contactor aperture monitoring. «DC Leakage» devices for detection of contiunuos earth leakage current (>=6 mA). Push button for display language changing and STOP to end the charge and allow plug extraction in FREE mode. Set up for communication over RS485 serial line (NET mode with management via server). Operating temperature -30°C to +50°C. Impact resistance IK08. Enclosure with IP54 degree of protection. Compliant with CEI EN 61851-1, CEI EN 62196-2, CEI EN 61439-1, CEI EN 60304-7-722 standards and complete with CE marking.