Catálogo

Warning! You must be logged in to download documents. If not, you will be redirected to the login page

SÉRIE BE-W

WALL BOX 1 TOMADA T2

Type 2 1P+N+T 32A 230V~ 7,4kW 32A 230V 1P+N+T IP54 IK08

Cod. 205.EVW19-B0

Em exaustão

Wall mounting box in halogen free plastic with 1 socket Type 2 32A 230Vac 7,4kW with plug lock in compliance with IEC/EN 62196-2. Suitable for charging electric vehicles in «mode 3» in compliance with IEC/EN 61851-1. Version for home charging in absolute safety. Exclusive design with “dual Feel Sensitive” finish with the possibility for personalisation,made of special technopolymer highly resistant to UVA rays. High degree of protection against dust and water.

Série comercial

Série BE-W

Descrição sintéica

WALL BOX 1 TOMADA T2

Material

TECNOPOLÍMERO

Corrente nominal

32A

Tensão nominal

230V

Frequência

50/60Hz

Polos

1P+N+T

Grau de proteção IP

IP54

Working temperature

-25°C/+40°C

GLOW WIRE

GW 650°C

Grau de proteção IK

IK08

Cor

ANTRACITE

Solução salina

Resistente

UV protection

UV resistant

Versão de montagem

PAREDE

Dimensions

235x370x115mm

Product

EAN code

8001636438498

INTRASTAT code

8537109899

Net weight

3.257 KG

Quantidade Mínima

Packaging

Packaging Carton

EAN code

Quantity

Depth

640.0 MM

Width

320.0 MM

Height

140.0 MM

Volume

28672.0 CCM

DIRECTIVE EMC 2014/30/UE	[European Directives] Electromagnetic Compatibility Directive
IEC 61439-7 (2018)	[International Standard] Low-voltage switchgear and controlgear assemblies - Part 7: Assemblies for specific applications such as marinas, camping sites, market squares, electric vehicle charging stations
IEC 61851-1 (2010)	[International Standard] Electric vehicle conductive charging system - Part 1: General requirements
DIRECTIVE LOW VOLTAGE 2014/35/UE	[European Directives] Low Voltage Directive

Version

SOLO

EV standard

Type 2 1P+N+T 32A 230V~ 7,4kW

EV functions

charge in mode 3 with pwm circuit pilot

energy metering and current consumption

protection against direct contact Safety Child Shutters

identification of connected cord-set size

power contactor aperture monitoring

working in mode stand-alone free

managing of latching system

EV equipment

1 terminal strip 3x10mm²

1 power supply 24Vdc 36W

1 fuse holder 1P+N gG 4A

1 control card

1 stop charge push-button (mode free)

1 couple of service led

1 digital energy meter 1P+N 45A

1 industrial contactor 2P 32A 24Vdc

EV excluded

upstream protections (by the installer):

1 circuit breaker RCD Type B

1 shunt trip release 24Vdc

emergency line 24Vdc (optional)

1 circuit breaker 1P+N C40 30mA

EV specifications

Wall mounting box in thermoplastic material halogen free resistant to impact and UV rays. Equipped with: 1 socket Type 2 in compliance with IEC/EN 62196-2 for mode 3 charging in compliance with IEC/EN 61851-1, equipped with shutter protection (IPXXD degree of protection without any additional devides), plug latching system to avoid unintetional withdraw under load, maximum supply current 32A single-phase 230Vac (7,4kW). Complete with: Digital meter for the measurement of the energy delivered and the control of current cosumption. Push button for display language changing and STOP to end the charge and allow plug extraction in FREE mode. Provide suitable upstream protection designed on load and line length. Operating temperature -25°C to +40°C. Impact resistance IK08. Enclosure with IP54 degree of protection. Compliant with CEI EN 61851-1, CEI EN 62196-2, CEI EN 61439-7, CEI EN 60304-7-722 standards and complete with CE marking.

Guia de instruções

InfoTECH - Ficha Técnica Detalhada [EN]

Desenho Técnico [DWG]

InfoTECH - Ficha Técnica Detalhada [IT]

Desenho Técnico [PDF]

Desenho Técnico [STP]