Catálogo

Warning! You must be logged in to download documents. If not, you will be redirected to the login page

SÉRIE BE-A

PILLAR BE-A

Type 2 3P+N+T 32A 400V~ 22kW 32A 400V 3P+N+T IP54 IK10

Cod. 205.A59-D0

Fora de Produção Pillar in powder paint galvanized steel with 1 socket Type 2 32A 400Vac 22kW compliant with the reference IEC/EN 62196-2 and and located in front Suitable for charging electric vehicles in «mode 3» in compliance with IEC/EN 61851-1 and It is particularly suited for installation in public places, this pillar is equipped with RFID Card reader for user identification and management. The sockets are equipped with protection shutters to ensure IPXXD degree of protection and the exclusive lighting makes possible to identify the operating status. The sockets are also equipped with special plug locking system and with exclusive anti-vandal access system that allows the insertion with one hand facilitating the charging operations. High degree of protection against dust and water.

Série comercial

Série BE-A

Descrição sintéica

PILLAR BE-A

Material

METAL ENVERNIZADO

Corrente nominal

32A

Tensão nominal

400V

Frequência

50/60Hz

Polos

3P+N+T

Grau de proteção IP

IP54

Working temperature

-30/+50°C with derating 24A

Grau de proteção IK

IK10

Cor

BRONZE

Solução salina

Resistente

UV protection

UV resistant

Versão de montagem

EM CIMA DA TORRE

Dimensions

220x1466x300mm

Product

EAN code

8001636127408

INTRASTAT code

8537109899

Net weight

0 KG

Quantidade Mínima

Packaging

Packaging Carton

EAN code

Quantity

Depth

0.0

Width

0.0

Height

0.0

Volume

0.0

DIRECTIVE EMC 2014/30/UE	[European Directives] Electromagnetic Compatibility Directive
IEC 61439-7 (2018)	[International Standard] Low-voltage switchgear and controlgear assemblies - Part 7: Assemblies for specific applications such as marinas, camping sites, market squares, electric vehicle charging stations
DIRECTIVE LOW VOLTAGE 2014/35/UE	[European Directives] Low Voltage Directive
EN IEC 61851-1 (2019)	[European Standard] Electric vehicle conductive charging system - Part 1: General requirements

Version

PRO

EV standard

Type 2 3P+N+T 32A 400V~ 22kW

HMI (Human-Machine Interfaces)

LCD 7'' push button commands

User authentication

RFID authentication

Connectivity

Ethernet

EV functions

charge in mode 3 with pwm circuit pilot
predisposition for serial communication
energy metering and current consumption
working in mode stand-alone free or personal
identification of authorized user
protection against direct contact Safety Child Shutters
protection against overcurrents and electric shock
identification of connected cord-set size
charge managing in case of power outage
managing of lid locking and latching system
load Balancing function

EV equipment

1 base with separation chamber
1 power supply 24Vdc 36W
1 fuse holder 1P+N gG 4A
1 DC Leakage detector
1 backup battery
1 reader RFID 13,56MHz
1 control card
1 modular contactor 4P 40A 24Vdc
1 terminal strip 5x35mm²
1 digital energy meter MID 3P+N 80A
1 circuit breaker 3P+N C40 30mA ist. A
1 TFT 7'' touch screen display with presence sensor
1 socket located in front with RGB Led

EV specifications

Pillar in powder paint galvanized steel with sockets located in front and illuminated with LED frame for signaling status. Prepared for floor installation with basement with function of anti-condensation separation room. Equipped with: 1 socket Type 2 in compliance with IEC/EN 62196-2 for mode 3 charging in compliance with IEC/EN 61851-1, equipped with shutter protection (IPXXD degree of protection without any additional devides), plug latching system to avoid unintetional withdraw under load, vandal-proof lockable lid, maximum supply current 32A three-phase 400Vac (22kW). Complete with: Automatic and residual current device for protection against over currents and indirect contact. Digital meter for the measurement of the energy delivered and the control of current cosumption, MID certifided «DC Leakage» devices for detection of contiunuos earth leakage current (>=6 mA). Backup batteries to ensure continuity of service in the case of power outage. «Save Unlook» system to ensure the possibility of extracting the connector in the event of a blackout. RFID reader for user identification and management of the charge, working in FREE or PERSONAL stand-alone mode. LCD TFT color display 7in touch screen, for messages and diagnostic management. Set up for communication over RS485 serial line (NET mode with management via server). Operating temperature -30°C to +50°C. Impact resistance IK10. Enclosure with IP54 degree of protection. Compliant with CEI EN 61851-1, CEI EN 62196-2, CEI EN 61439-7, CEI EN 60304-7-722 standards and complete with CE marking. Lower part of the socket side customizable. Color BE-BRONZE