Catálogo

Warning! You must be logged in to download documents. If not, you will be redirected to the login page

SÉRIE WB

WALL BOX CABLE+TOMA T2

Type 2 1P+N+T 16A 230V~ 3,7kW 16A 230V 1P+N+T IP54 IK08 Tipo 2 4m

Cod. 204.WB11R-T21

Em exaustão

Wall Box in thermoplastic material, for wall mounting, equipped with 1 Type 2 1P+N+T 16A 230 Vac 3.5 kW mobile socket in compliance with IEC/EN 62196-2 and with IPXXD degree of protection Suitable for charging electric vehicles in «mode 3» in compliance with EN61851-1. (cable + mobile connector corresponding to a case C connection). Version for home charging in absolute safety and equipped with RFID Card for user identification and manage Compact and captivating design made of special technopolymer highly resistant to UVA rays, high degree of protection against dust and water (IP54). Possibility of accessorising the station with pole support and galvanised steel plate

Série comercial

Série WB

Descrição sintéica

WALL BOX CABLE+TOMA T2

Material

TECNOPOLÍMERO

Cable length

Cable section

3G2,5+1x0,5mm²

Corrente nominal

16A

Tensão nominal

230V

Frequência

50/60Hz

Polos

1P+N+T

Grau de proteção IP

IP54

Working temperature

-25°C/+40°C

GLOW WIRE

GW 650°C

Grau de proteção IK

IK08

Cor

CINZA

Solução salina

Resistente

UV protection

UV resistant

Versão de montagem

PAREDE

Dimensions

215x350x120mm

Product

EAN code

8001636297965

INTRASTAT code

8537109899

Net weight

3.95 KG

Quantidade Mínima

Packaging

Packaging Carton

Quantity

EAN code

Depth

435.0 MM

Width

335.0 MM

Height

175.0 MM

Volume

25501.875 CCM

DIRECTIVE EMC 2014/30/UE	[European Directives] Electromagnetic Compatibility Directive
IEC 61439-7 (2018)	[International Standard] Low-voltage switchgear and controlgear assemblies - Part 7: Assemblies for specific applications such as marinas, camping sites, market squares, electric vehicle charging stations
DIRECTIVE LOW VOLTAGE 2014/35/UE	[European Directives] Low Voltage Directive
EN IEC 61851-1 (2019)	[European Standard] Electric vehicle conductive charging system - Part 1: General requirements

Version

LITE

EV standard

Type 2 1P+N+T 16A 230V~ 3,7kW

Com cabo integrado

Tipo 2

HMI (Human-Machine Interfaces)

LCD 2x20 char

User authentication

RFID authentication

EV functions

charge in mode 3 with pwm circuit pilot

predisposition for serial communication

energy metering and current consumption

identification of authorized user

working in mode stand-alone free or personal

protection against overcurrents and electric shock

power contactor aperture monitoring

EV equipment

1 terminal strip 1x6mm²

1 power supply 24Vdc 36W

1 DC Leakage detector

1 fuse holder 1P+N gG 4A

1 control card

1 stop charge push-button (mode free)

1 lcd display 2x20 rows backlight

1 reader RFID 13,56MHz

1 digital energy meter 1P+N 40A

1 shunt trip release 24Vdc

1 couple of service led

1 modular contactor 2P 25A 24Vdc

1 circuit breaker 1P+N D20 30mA ist. A

1 cable 3G2,5+1x0,5mm² 4m

1 cable wrapping support

EV excluded

emergency line 24Vdc (optional)

EV specifications

Charging station for electric vehicles with wall installation (or on a pole) made of grey technopolymer resistant to impact and UV rays, IP54 degree of protection, size 215 x 350 x 123 mm.Container with status LED. Station equipped with a type 2 mobile socket (cable + mobile connector corresponding to a case C connection) in compliance with CEI EN 62196-2 and suitable for charging in mode 3 in compliance with CEI EN 61851-1. The socket unit is mounted onto the vehicle to avoid tampering and disconnections while charging. The IPXXD degree of protection required by the standard is provided through a control system to verify the correct opening of the power contactor. Maximum deliverable current 16 A single-phase (3.5 kW). Station complete with automatic and differential protection devices and digital meter for the measurement of the energy delivered and the control of the absorbed current. Set up for communication over RS485 serial line (NET mode with management via server). RFID reader for user recognition and management of the charge. Operation in FREE or PERSONAL stand-alone mode. Operating temperature -25°C to +40°C, IK07 impact resistance. Possibility of accessorising the station with pole support and galvanised steel plate. Compliant with CEI EN 61851-1, CEI EN 62196-2, CEI EN 61439-7, CEI EN 60304-7-722 standards and complete with CE marking.

InfoTECH - Ficha Técnica Detalhada [IT]

InfoTECH - Ficha Técnica Detalhada [EN]

Desenho Técnico [PDF]

Desenho Técnico [STP]

Desenho Técnico [DWG]