Catálogo

Warning! You must be logged in to download documents. If not, you will be redirected to the login page

SÉRIE WB

WALL BOX 1 TOMADA 3A

Type 3C 1P+N+T 16A 230V~ 3,7kW 16A 230V 1P+N+T IP54 IK08

Cod. 204.WB11E-3C

Em exaustão

Wall Box made of thermoplastic material, for wall mounting, equipped with 1 Type 3C 1P+N+T 16A 230 Vac 3.5 kW socket with safety shutter in compliance with the 62196-2 standard Suitable for charging electric vehicles in «mode 3» in compliance with EN61851-1. Basic version for charging at home in total safety Compact and captivating design made of special technopolymer highly resistant to UVA rays, high degree of protection against dust and water (IP54). Possibility of accessorising the station with pole support and galvanised steel plate

Série comercial

Série WB

Descrição sintéica

WALL BOX 1 TOMADA 3A

Material

TECNOPOLÍMERO

Corrente nominal

16A

Tensão nominal

230V

Frequência

50/60Hz

Polos

1P+N+T

Grau de proteção IP

IP54

Working temperature

-25°C/+40°C

GLOW WIRE

GW 650°C

Grau de proteção IK

IK08

Cor

CINZA

Solução salina

Resistente

UV protection

UV resistant

Versão de montagem

PAREDE

Dimensions

215x350x120mm

Product

EAN code

8001636300351

INTRASTAT code

8537109899

Net weight

2.418 KG

Quantidade Mínima

Packaging

Packaging Box

EAN code

Quantity

Depth

353.0 MM

Width

263.0 MM

Height

165.0 MM

Volume

15318.435 CCM

DIRECTIVE EMC 2014/30/UE	[European Directives] Electromagnetic Compatibility Directive
IEC 61439-7 (2018)	[International Standard] Low-voltage switchgear and controlgear assemblies - Part 7: Assemblies for specific applications such as marinas, camping sites, market squares, electric vehicle charging stations
DIRECTIVE LOW VOLTAGE 2014/35/UE	[European Directives] Low Voltage Directive
EN IEC 61851-1 (2019)	[European Standard] Electric vehicle conductive charging system - Part 1: General requirements

Version

SOLO

EV standard

Type 3C 1P+N+T 16A 230V~ 3,7kW

EV specifications

Charging station for electric vehicles with wall installation (or on a pole) made of grey technopolymer resistant to impact and UV rays, IP54 degree of protection, size 215 x 350 x 123 mm.Container with status LED. Station equipped with a type 3C socket with a protective shutter compliant with the CEI EN 62196-2 standard and suitable for charging in mode 3 in compliance with the CEI EN 61851-1 standard (IPXXD degree of protection is guaranteed without further disconnecting devices). Maximum deliverable current 16 A single phase (3.5 kW) with identification of the size of the connected cable. For correct installation and commissioning an external upstream protection is necessary, using a 2P D20 30 mA circuit breaker ist. A. Operation in stand-alone FREE mode and STOP button to end the charge. Operating temperature -25°C to +40°C, IK07 impact resistance. Possibility of accessorising the station with pole support and galvanised steel plate. Compliant with CEI EN 61851-1, CEI EN 62196-2, CEI EN 61439-7, CEI EN 60304-7-722 standards and complete with CE marking.

Desenho Técnico [DWG]

Desenho Técnico [STP]

Desenho Técnico [PDF]

Esquema de ligação

InfoTECH - Ficha Técnica Detalhada [IT]

InfoTECH - Ficha Técnica Detalhada [EN]