Catálogo

Warning! You must be logged in to download documents. If not, you will be redirected to the login page

SÉRIE UB

CONSUMER UNIT 1 SOCKET RFID

DE 2P+E 16A 230V~ 3,7kW 16A 230V 1P+N+T IP44 IK07

Cod. 204.UB11R-UN

Em exaustão

Panel in thermoplastic material, for wall mounting, equipped with 1 GERMAN (domestic) 1P+N+T 16A 230 Vac 3.5 kW socket in compliance with IEC 60884-1 Suitable for charging electric vehicles in «mode 1» in compliance with IEC/EN 61851-1. Particularly suited for installation in environments where mode 3 is not mandatory. Equipped with RFID Card for user identification and management Panel made of special technopolymer highly resistant to UVA rays, high degree of protection against dust and water (IP44). Possibility of accessorising the station with pole support and galvanised steel plate

Série comercial

Série UB

Descrição sintéica

CONSUMER UNIT 1 SOCKET RFID

Material

TECNOPOLÍMERO

Corrente nominal

16A

Tensão nominal

230V

Frequência

50/60Hz

Polos

1P+N+T

Grau de proteção IP

IP44

Working temperature

-25°C/+40°C

GLOW WIRE

GW 650°C

Grau de proteção IK

IK07

Cor

CINZA

Solução salina

Resistente

UV protection

UV resistant

Versão de montagem

PAREDE

Product

EAN code

8001636289175

INTRASTAT code

8537109899

Net weight

3.435 KG

Quantidade Mínima

Packaging

Packaging Carton

Quantity

EAN code

Depth

435.0 MM

Width

335.0 MM

Height

175.0 MM

Volume

25501.875 CCM

DIRECTIVE EMC 2014/30/UE	[European Directives] Electromagnetic Compatibility Directive
IEC 61439-7 (2018)	[International Standard] Low-voltage switchgear and controlgear assemblies - Part 7: Assemblies for specific applications such as marinas, camping sites, market squares, electric vehicle charging stations
DIRECTIVE LOW VOLTAGE 2014/35/UE	[European Directives] Low Voltage Directive
EN IEC 61851-1 (2019)	[European Standard] Electric vehicle conductive charging system - Part 1: General requirements

Version

BUSINESS

EV standard

DE 2P+E 16A 230V~ 3,7kW

HMI (Human-Machine Interfaces)

None

User authentication

RFID authentication

EV functions

protection against overcurrents and electric shock

predisposition for serial communication

energy metering and current consumption

identification of authorized user

working in mode stand-alone free or personal

protection against direct contact Safety Child Shutters

EV equipment

1 terminal strip 3x6mm²

1 power supply 24Vdc 36W

1 fuse holder 1P+N gG 4A

1 control card

1 reader RFID 13,56MHz

1 digital energy meter 1P+N 40A

1 couple of service led

1 modular contactor 2P 25A 24Vdc

1 circuit breaker 1P+N D20 30mA ist. A

EV specifications

Charging station for electric vehicles with wall installation (or on a pole) made of grey technopolymer resistant to impact and UV rays, IP44 degree of protection, size 256 X 400 X 140 mm.Container with lockable window for 16 DIN modules with status LEDs. Station equipped with one UNEL-type (domestic) socket suitable for charging in mode 1 in compliance with the CEI EN 61851-1 standard. The use of this socket is allowed only in those environments where mode 3 is not mandatory. Maximum deliverable current 16 A single-phase (3.5 kW). Station complete with automatic and differential protection devices and digital meter for the measurement of the energy delivered and the control of the absorbed current. Set up for communication over RS485 serial line (NET mode with management via server). RFID reader for user recognition and management of the charge. Operation in FREE or PERSONAL stand-alone mode. Operating temperature -25°C to +40°C, IK07 impact resistance. Possibility of accessorising the station with pole support and galvanised steel plate. Compliant with CEI EN 61851-1, CEI EN 62196-2, CEI EN 61439-7, CEI EN 60304-7-722 standards and complete with CE marking.

InfoTECH - Ficha Técnica Detalhada [IT]

InfoTECH - Ficha Técnica Detalhada [EN]