Catálogo

Warning! You must be logged in to download documents. If not, you will be redirected to the login page

SÉRIE UB

CON. UNIT 1 SOCKET WITH LOCK

Type 2 1P+N+T 16A 230V~ 3,7kW 16A 230V 1P+N+T IP44 IK07

Cod. 204.UB11B-T2

Fora de Produção Cabinet made of thermoplastic material, for wall mounting, equipped with 1 Type 2 1P+N+T 16A 230 Vac 3.5 kW socket with safety shutter in compliance with IEC/EN 62196-2 Suitable for charging electric vehicles in «mode 3» in compliance with IEC/EN 61851-1. Equipped with RFID Card for user identification and management Charging station with sockets equipped with special plug locking system and with exclusive anti-vandal access system. Panel made of special technopolymer highly resistant to UVA rays, high degree of protection against dust and water (IP54)

Série comercial

Série UB

Descrição sintéica

CON. UNIT 1 SOCKET WITH LOCK

Material

TECNOPOLÍMERO

Corrente nominal

16A

Tensão nominal

230V

Frequência

50/60Hz

Polos

1P+N+T

Grau de proteção IP

IP44

Working temperature

-25°C/+40°C

GLOW WIRE

GW 650°C

Grau de proteção IK

IK07

Cor

CINZA

Solução salina

Resistente

UV protection

UV resistant

Versão de montagem

PAREDE

Product

EAN code

8001636289267

INTRASTAT code

8537109899

Net weight

5.384 KG

Quantidade Mínima

Packaging

Packaging Carton

Quantity

EAN code

8001636289267

Depth

610.0 MM

Width

340.0 MM

Height

195.0 MM

Volume

40443.0 CCM

DIRECTIVE EMC 2014/30/UE	[European Directives] Electromagnetic Compatibility Directive
IEC 61439-7 (2018)	[International Standard] Low-voltage switchgear and controlgear assemblies - Part 7: Assemblies for specific applications such as marinas, camping sites, market squares, electric vehicle charging stations
DIRECTIVE LOW VOLTAGE 2014/35/UE	[European Directives] Low Voltage Directive
EN IEC 61851-1 (2019)	[European Standard] Electric vehicle conductive charging system - Part 1: General requirements

Version

BUSINESS

EV standard

Type 2 1P+N+T 16A 230V~ 3,7kW

HMI (Human-Machine Interfaces)

None

User authentication

RFID authentication

EV functions

charge in mode 3 with pwm circuit pilot
predisposition for serial communication
energy metering and current consumption
working in mode stand-alone free or personal
identification of authorized user
protection against direct contact Safety Child Shutters
protection against overcurrents and electric shock
identification of connected cord-set size
managing of lid locking and latching system

EV equipment

1 terminal strip 3x6mm²
1 power supply 24Vdc 36W
1 fuse holder 1P+N gG 4A
1 DC Leakage detector
1 reader RFID 13,56MHz
1 stop charge push-button (mode free)
1 control card
1 digital energy meter 1P+N 40A
1 couple of service led
1 modular contactor 2P 25A 24Vdc
1 circuit breaker 1P+N D20 30mA ist. A

EV excluded

emergency line 24Vdc (optional)

EV specifications

Charging station for electric vehicles with wall installation (or on a pole) made of grey technopolymer resistant to impact and UV rays, IP54 degree of protection, size 328 X 550 X 140 mm.Container with lockable window for 16 DIN modules with status LEDs. Station equipped with a type 2 anti-vandal socket with a protective shutter compliant with the CEI EN 62196-2 standard and suitable for charging in mode 3 in compliance with the CEI EN 61851-1 standard (IPXXD degree of protection is guaranteed without further disconnecting devices). Socket equipped with plug locking system to prevent accidental removal and interlocking of the cover to prevent tampering and unauthorised access. Maximum deliverable current 16 A single phase (3.5 kW) with identification of the size of the connected cable. Station complete with automatic and differential protection devices and digital meter for the measurement of the energy delivered and the control of the absorbed current. Set up for external 24 V DC emergency power supply system to guarantee continuity of service in case of main AC power failure. Set up for communication over RS485 serial line (NET mode with management via server). RFID reader for user recognition and management of the charge. Operation in FREE or PERSONAL stand-alone mode. STOP button to end the charge and allow plug extraction (FREE mode). Operating temperature -25°C to +40°C, IK07 impact resistance. Possibility of accessorising the station with pole support and galvanised steel plate. Compliant with CEI EN 61851-1, CEI EN 62196-2, CEI EN 61439-7, CEI EN 60304-7-722 standards and complete with CE marking.