Catalogue

Warning! You must be logged in to download documents. If not, you will be redirected to the login page

SÉRIE WB

WALL BOX 1 PRISE TYPE 2

Type 2 1P+N+T 16A 230V~ 3,7kW 16A 230V 1P+N+T IP54 IK08

Cod. 204.WB11P-T2

Hors Production Wall Box en matériau thermoplastique, pour montage mural, équipé de 1 prise de type 2 3P+N+T 16A 230Vac 3,5kW et d’obturateur de sécurité conformément à la réglementation IEC/EN 62196-2 Adapté à la charge des véhicules électriques en «mode 3» conformément à la réglementation EN 61851-1. Version pour recharges domestiques en toute sécurité Design captivant et compact, réalisé en technopolymère très résistant aux rayons UVA, degré élevé de protection IP54 contre la poussière et l’eau. Possibilité d’équiper la borne avec le poteau et la plaque en acier galvanisé

Série commerciale

Série WB

Description

WALL BOX 1 PRISE TYPE 2

Matériau

Technopolymère

Courant nominal

16A

Tension nominale

230V

Fréquence d'utilisation

50/60Hz

Pôles

1P+N+T

Indice de protection IP

IP54

Température de fonctionnement

-25°C/+40°C

Fil incandescent

650°C

Indice de protection IK

IK08

Couleur

GRIS

Solution saline

Résistant

UV protection

UV resistant

Type de installation

MONTAGE SAILLIE

Dimensions

215x350x120mm

Product

EAN code

8001636300436

INTRASTAT code

8537109899

Net weight

3.101 KG

Quantité minimum

Packaging

Packaging Box

Quantity

EAN code

8001636300436

Depth

353.0 MM

Width

263.0 MM

Height

165.0 MM

Volume

15318.435 CCM

DIRECTIVE EMC 2014/30/UE	[European Directives] Electromagnetic Compatibility Directive
IEC 61439-7 (2018)	[International Standard] Low-voltage switchgear and controlgear assemblies - Part 7: Assemblies for specific applications such as marinas, camping sites, market squares, electric vehicle charging stations
DIRECTIVE LOW VOLTAGE 2014/35/UE	[European Directives] Low Voltage Directive
EN IEC 61851-1 (2019)	[European Standard] Electric vehicle conductive charging system - Part 1: General requirements

Version

SOLO

EV standard

Type 2 1P+N+T 16A 230V~ 3,7kW

EV functions

charge in mode 3 with pwm circuit pilot
predisposition for serial communication
protection against direct contact Safety Child Shutters
protection against overcurrents and electric shock
identification of connected cord-set size
managing of latching system
current consuption metering
working in mode stand-alone free

EV equipment

1 terminal strip 1x6mm²
1 power supply 24Vdc 36W
1 fuse holder 1P+N gG 4A
1 DC Leakage detector
1 control card
1 stop charge push-button (mode free)
1 couple of service led
1 current transformer
1 circuit breaker 1P+N D20 30mA ist. A
1 modular contactor 2P 25A 24Vdc

EV excluded

emergency line 24Vdc (optional)

EV capitolato

Charging station for electric vehicles with wall installation (or on a pole) made of grey technopolymer resistant to impact and UV rays, IP54 degree of protection, size 215 x 350 x 123 mm.Container with status LED. Station equipped with a type 2 socket with a protective shutter compliant with the CEI EN 62196-2 standard and suitable for charging in mode 3 in compliance with the CEI EN 61851-1 standard (IPXXD degree of protection is guaranteed without further disconnecting devices). Socket equipped with a plug locking system to avoid tampering and disconnection during charging. Maximum deliverable current 16 A single phase (3.5 kW) with identification of the size of the connected cable. Station complete with both automatic and differential protection devices. Operation in stand-alone FREE mode and STOP button to end the charge and allow extraction of the plug. Set up for external 24 V DC emergency power supply system to guarantee continuity of service in case of main AC power failure. Operating temperature -25°C to +40°C, IK07 impact resistance. Possibility of accessorising the station with pole support and galvanised steel plate. Compliant with CEI EN 61851-1, CEI EN 62196-2, CEI EN 61439-7, CEI EN 60304-7-722 standards and complete with CE marking.