Catalogue

Warning! You must be logged in to download documents. If not, you will be redirected to the login page

SÉRIE WB

WALL BOX CABLE+PRISE T2

Type 2 1P+N+T 16A 230V~ 3,7kW 16A 230V 1P+N+T IP54 IK08 Type 2 4m

Cod. 204.WB11E-T21

Hors Production

Wall Box en matériau thermoplastique, pour montage mural équipé de 1 prise volante de type 2 1P+N+T 16A 230Vac 3,5kW conformément à la réglementation IEC/EN 62196-2, avec degré de protection IPXXD Adapté à la charge des véhicules électriques en «mode 3» conformément à la réglementation EN61851-1 (câble + connecteur mobile correspondants à la connexion cas C). Version basic pour recharges domestiques en toute sécurité Design captivant et compact, réalisé en technopolymère très résistant aux rayons UVA, degré élevé de protection IP54 contre la poussière et l’eau. Possibilité d’équiper la borne avec le poteau et la plaque en acier galvanisé

Série commerciale

Série WB

Description

WALL BOX CABLE+PRISE T2

Matériau

Technopolymère

Longueur câble

Section du câble

3G2,5+1x0,5mm²

Courant nominal

16A

Tension nominale

230V

Fréquence d'utilisation

50/60Hz

Pôles

1P+N+T

Indice de protection IP

IP54

Température de fonctionnement

-25°C/+40°C

Fil incandescent

650°C

Indice de protection IK

IK08

Couleur

GRIS

Solution saline

Résistant

UV protection

UV resistant

Type de installation

MONTAGE SAILLIE

Dimensions

215x350x120mm

Product

EAN code

8001636300399

INTRASTAT code

8537109899

Net weight

3.484 KG

Quantité minimum

Packaging

Packaging Carton

EAN code

Quantity

Depth

435.0 MM

Width

335.0 MM

Height

175.0 MM

Volume

25501.875 CCM

DIRECTIVE EMC 2014/30/UE	[European Directives] Electromagnetic Compatibility Directive
IEC 61439-7 (2018)	[International Standard] Low-voltage switchgear and controlgear assemblies - Part 7: Assemblies for specific applications such as marinas, camping sites, market squares, electric vehicle charging stations
DIRECTIVE LOW VOLTAGE 2014/35/UE	[European Directives] Low Voltage Directive
EN IEC 61851-1 (2019)	[European Standard] Electric vehicle conductive charging system - Part 1: General requirements

Version

SOLO

EV standard

Type 2 1P+N+T 16A 230V~ 3,7kW

Avec câble intégré

Type 2

EV functions

charge in mode 3 with pwm circuit pilot

predisposition for serial communication

power contactor aperture monitoring

working in mode stand-alone free

current consuption metering

EV equipment

1 terminal strip 3x6mm²

1 power supply 24Vdc 36W

1 fuse holder 1P+N gG 4A

1 DC Leakage detector

1 control card

1 stop charge push-button (mode free)

1 current transformer

1 couple of service led

1 modular contactor 2P 25A 24Vdc

1 cable wrapping support

1 cable 3G2,5+1x0,5mm² 4m

EV excluded

upstream protections (by the installer):

1 circuit breaker 1P+N D20 30mA ist. A

1 shunt trip release 24Vdc

emergency line 24Vdc (optional)

EV capitolato

Charging station for electric vehicles with wall installation (or on a pole) made of grey technopolymer resistant to impact and UV rays, IP54 degree of protection, size 215 x 350 x 123 mm.Container with status LED. Station equipped with a type 2 mobile socket (cable + mobile connector corresponding to a case C connection) in compliance with CEI EN 62196-2 and suitable for charging in mode 3 in compliance with CEI EN 61851-1. The socket unit is mounted onto the vehicle to avoid tampering and disconnections while charging. The IPXXD degree of protection required by the standard is provided through a control system to verify the correct opening of the power contactor. Maximum deliverable current 16 A single-phase (3.5 kW). For correct installation and commissioning an external upstream protection is necessary, using a 2P D20 30 mA circuit breaker ist. A, together with a 24 Vdc trip coil for its activation. Operation in stand-alone FREE mode and STOP button to end the charge. Operating temperature -25°C to +40°C, IK07 impact resistance. Possibility of accessorising the station with pole support and galvanised steel plate. Compliant with CEI EN 61851-1, CEI EN 62196-2, CEI EN 61439-7, CEI EN 60304-7-722 standards and complete with CE marking.

InfoTECH - Fiche Technique Détaillée [EN]

InfoTECH - Fiche Technique Détaillée [IT]

Dessin Tecnique [PDF]

Dessin Tecnique [STP]

Dessin Tecnique [DWG]