Catálogo

Warning! You must be logged in to download documents. If not, you will be redirected to the login page

SERIE WB

WALL BOX CABLE+BASE T2

Type 2 1P+N+T 16A 230V~ 3,7kW 16A 230V 1P+N+T IP54 IK08 Tipo 2 4m

Cod. 204.WB11P-T21

Fuera de Producción

Wall Box in thermoplastic material, for wall mounting, equipped with 1 Type 2 1P+N+T 16A 230 Vac 3.5 kW mobile socket in compliance with IEC/EN 62196-2 and with IPXXD degree of protection Suitable for the charging of electric vehicles in «mode 3» in compliance with the EN61851-1 standard (cable + mobile connector corresponding to a case C connection). Version for charging at home in total safety Compact and captivating design made of special technopolymer highly resistant to UVA rays, high degree of protection against dust and water (IP54). Possibility of accessorising the station with pole support and galvanised steel plate

Serie comercial

Serie WB

Descripción

WALL BOX CABLE+BASE T2

Material

POLÍMERO TÉCNICO

Longitud cable

Sección del cable

3G2,5+1x0,5mm²

Intensidad nominal

16A

Tensión nominal

230V

Frecuencia nominal

50/60Hz

Polos

1P+N+T

Grado de protección IP

IP54

Temperatura de ejercicio

-25°C/+40°C

Prueba del hilo incandescente

GW 650°C

Grado de protección IK

IK08

Color

GRIS

Solución salina

Resistente

UV protection

UV resistant

Tipo de instalación

MURAL

Dimensiones

215x350x120mm

Product

EAN code

8001636300405

INTRASTAT code

8537109899

Net weight

3.766 KG

Cantidad mínima

Packaging

Packaging Carton

Quantity

EAN code

Depth

435.0 MM

Width

335.0 MM

Height

175.0 MM

Volume

25501.875 CCM

DIRECTIVE EMC 2014/30/UE	[European Directives] Electromagnetic Compatibility Directive
IEC 61439-7 (2018)	[International Standard] Low-voltage switchgear and controlgear assemblies - Part 7: Assemblies for specific applications such as marinas, camping sites, market squares, electric vehicle charging stations
DIRECTIVE LOW VOLTAGE 2014/35/UE	[European Directives] Low Voltage Directive
EN IEC 61851-1 (2019)	[European Standard] Electric vehicle conductive charging system - Part 1: General requirements

Versión

SOLO

EV standard

Type 2 1P+N+T 16A 230V~ 3,7kW

Con cable integrado

Tipo 2

EV funciones

charge in mode 3 with pwm circuit pilot

predisposition for serial communication

protection against overcurrents and electric shock

power contactor aperture monitoring

working in mode stand-alone free

current consuption metering

EV equipo

1 terminal strip 1x6mm²

1 power supply 24Vdc 36W

1 fuse holder 1P+N gG 4A

1 DC Leakage detector

1 control card

1 stop charge push-button (mode free)

1 shunt trip release 24Vdc

1 current transformer

1 couple of service led

1 modular contactor 2P 25A 24Vdc

1 circuit breaker 1P+N D20 30mA ist. A

1 cable wrapping support

1 cable 3G2,5+1x0,5mm² 4m

EV excluido

emergency line 24Vdc (optional)

EV capitolato

Charging station for electric vehicles with wall installation (or on a pole) made of grey technopolymer resistant to impact and UV rays, IP54 degree of protection, size 215 x 350 x 123 mm.Container with status LED. Station equipped with a type 2 mobile socket (cable + mobile connector corresponding to a case C connection) in compliance with CEI EN 62196-2 and suitable for charging in mode 3 in compliance with CEI EN 61851-1. The socket unit is mounted onto the vehicle to avoid tampering and disconnections while charging. The IPXXD degree of protection required by the standard is provided through a control system to verify the correct opening of the power contactor. Maximum deliverable current 16 A single-phase (3.5 kW). Station complete with both automatic and differential protection devices. Operation in stand-alone FREE mode and STOP button to end the charge. Operating temperature -25°C to +40°C, IK07 impact resistance. Possibility of accessorising the station with pole support and galvanised steel plate. Compliant with CEI EN 61851-1, CEI EN 62196-2, CEI EN 61439-7, CEI EN 60304-7-722 standards and complete with CE marking.

InfoTECH - Ficha Técnica Detallada [IT]

Dibujo Tecnico [PDF]

InfoTECH - Ficha Técnica Detallada [EN]

Dibujo Tecnico [STP]

Dibujo Tecnico [DWG]