Catálogo

Warning! You must be logged in to download documents. If not, you will be redirected to the login page

SERIE UB

CUADRO 2 BASES RFID

Type 3A 1P+N+T 16A 230V~ 3,7kW DE 2P+T 16A 230V~ 3,7kW 32A 230V 1P+N+T IP44 IK07

Cod. 204.UB21R-3AUN

Fuera de Producción

Panel in thermoplastic material, for wall mounting, equipped with 1 Type 3A 1P+N+T 16A 230 Vac 3.5 kW socket and 1 GERMAN 1P+N+T 16A 230 Vac 3.5 kW socket in compliance with IEC/EN 62196-2 Suitable for charging electric vehicles in «mode 3» and «mode 1» in compliance with IEC/EN 61851-1. Particularly suited for installation in environments where mode 3 is not mandatory. Equipped with RFID Card for user identification and management Panel made of special technopolymer highly resistant to UVA rays, high degree of protection against dust and water (IP44). Possibility of accessorising the station with pole support and galvanised steel plate

Serie comercial

Serie UB

Descripción

CUADRO 2 BASES RFID

Material

POLÍMERO TÉCNICO

Intensidad nominal

32A

Tensión nominal

230V

Frecuencia nominal

50/60Hz

Polos

1P+N+T

Grado de protección IP

IP44

Temperatura de ejercicio

-25°C/+40°C

Prueba del hilo incandescente

GW 650°C

Grado de protección IK

IK07

Color

GRIS

Solución salina

Resistente

UV protection

UV resistant

Tipo de instalación

MURAL

Product

EAN code

8001636289304

INTRASTAT code

8537109899

Net weight

0 KG

Cantidad mínima

Packaging

Packaging Carton

Quantity

EAN code

Depth

0.0

Width

0.0

Height

0.0

Volume

0.0

DIRECTIVE EMC 2014/30/UE	[European Directives] Electromagnetic Compatibility Directive
IEC 61439-7 (2018)	[International Standard] Low-voltage switchgear and controlgear assemblies - Part 7: Assemblies for specific applications such as marinas, camping sites, market squares, electric vehicle charging stations
DIRECTIVE LOW VOLTAGE 2014/35/UE	[European Directives] Low Voltage Directive
EN IEC 61851-1 (2019)	[European Standard] Electric vehicle conductive charging system - Part 1: General requirements

Versión

BUSINESS

EV standard

Type 3A 1P+N+T 16A 230V~ 3,7kW

DE 2P+T 16A 230V~ 3,7kW

IHM (Interface Hombre-Máquina)

Niguno

Autenticacion de usuario

Autenticación RFID

EV funciones

charge in mode 3 with pwm circuit pilot

predisposition for serial communication

energy metering and current consumption

identification of authorized user

working in mode stand-alone free or personal

protection against direct contact Safety Child Shutters

protection against overcurrents and electric shock

EV equipo

1 terminal strip 3x10mm²

1 power supply 24Vdc 36W

1 fuse holder 1P+N gG 4A

1 DC Leakage detector

2 control cards

2 readers RFID 13,56MHz

1 main switch 2P 40A

2 digital energy meters 1P+N 40A

2 modular contactors 2P 25A 24Vdc

2 circuit breakers 1P+N D20 30mA ist. A

2 couples of service led

EV excluido

emergency line 24Vdc (optional)

EV capitolato

Charging station for electric vehicles with wall installation (or on a pole) made of grey technopolymer resistant to impact and UV rays, IP44 degree of protection, size 328 X 400 X 140 mm.Container with lockable window for 16 DIN modules with status LEDs. Station equipped with a type 3A socket equipped with protection shutter compliant with the CEI EN 62196-2 standard and suitable for charging in mode 3 in compliance with the CEI EN 61851-1 standard (IPXXD degree of protection is guaranteed without further disconnecting devices) and a UNEL (domestic) socket suitable for charging in mode 1 in compliance with CEI EN 61851-1 (the use of this socket is allowed only in those environments where mode 3 is not required). Maximum deliverable current 16 A single-phase (3.5 kW) for the type 3A socket and 16 A single-phase (3.5 kW) for the UNEL-type socket. . Station complete with automatic and differential protection devices and digital meter for the measurement of the energy delivered and the control of the absorbed current. Set up for communication over RS485 serial line (NET mode with management via server). RFID reader for user recognition and management of the charge. Operation in FREE or PERSONAL stand-alone mode. Operating temperature -25°C to +40°C, IK07 impact resistance. Possibility of accessorising the station with pole support and galvanised steel plate. Compliant with CEI EN 61851-1, CEI EN 62196-2, CEI EN 61439-7, CEI EN 60304-7-722 standards and complete with CE marking.

InfoTECH - Ficha Técnica Detallada [EN]

InfoTECH - Ficha Técnica Detallada [IT]