Catálogo

Warning! You must be logged in to download documents. If not, you will be redirected to the login page

SERIE UB

CUADRO DE DISTRIBUCIÓN 1 BASE

Type 3C 1P+N+T 16A 230V~ 3,7kW 16A 230V 1P+N+T IP44 IK07

Cod. 204.UB11L-3C

Fuera de Producción

Cabinet made of thermoplastic material, for wall mounting, equipped with 1 Type 3C 1P+N+T 16A 230 Vac 3.5 kW socket with safety shutter in compliance with IEC/EN 62196-2 Suitable for charging electric vehicles in «mode 3» in compliance with IEC/EN 61851-1. Panel made of special technopolymer highly resistant to UVA rays, high degree of protection against dust and water (IP44). Possibility of accessorising the station with pole support and galvanised steel plate

Serie comercial

Serie UB

Descripción

CUADRO DE DISTRIBUCIÓN 1 BASE

Material

POLÍMERO TÉCNICO

Intensidad nominal

16A

Tensión nominal

230V

Frecuencia nominal

50/60Hz

Polos

1P+N+T

Grado de protección IP

IP44

Temperatura de ejercicio

-25°C/+40°C

Prueba del hilo incandescente

GW 650°C

Grado de protección IK

IK07

Color

GRIS

Solución salina

Resistente

UV protection

UV resistant

Tipo de instalación

MURAL

Product

EAN code

8001636288635

INTRASTAT code

8537109899

Net weight

3.22 KG

Cantidad mínima

Packaging

Packaging Carton

EAN code

8001636738772

Quantity

Depth

420.0 MM

Width

310.0 MM

Height

195.0 MM

Volume

25389.0 CCM

DIRECTIVE EMC 2014/30/UE	[European Directives] Electromagnetic Compatibility Directive
IEC 61439-7 (2018)	[International Standard] Low-voltage switchgear and controlgear assemblies - Part 7: Assemblies for specific applications such as marinas, camping sites, market squares, electric vehicle charging stations
DIRECTIVE LOW VOLTAGE 2014/35/UE	[European Directives] Low Voltage Directive
EN IEC 61851-1 (2019)	[European Standard] Electric vehicle conductive charging system - Part 1: General requirements

Versión

SOLO

EV standard

Type 3C 1P+N+T 16A 230V~ 3,7kW

IHM (Interface Hombre-Máquina)

Niguno

EV capitolato

Charging station for electric vehicles with wall installation (or on a pole) made of grey technopolymer resistant to impact and UV rays, IP44 degree of protection, size 256 X 400 X 140 mm.Container with lockable window for 16 DIN modules with status LEDs. Station equipped with a type 3C socket with a protective shutter compliant with the CEI EN 62196-2 standard suitable for charging in mode 3 in compliance with the CEI EN 61851-1 standard (IPXXD degree of protection is guaranteed without further disconnecting devices). Maximum deliverable current 16 A single-phase (3.5 kW) with identification of the connected cable size and with digital meter for the measurement of the energy delivered and control of the absorbed current. Set up for communication on RS485 serial line. For correct installation and commissioning an external upstream protection is necessary, using a 2P D20 30mA circuit breaker ist. A. Stand-alone FREE operation. Operating temperature -25°C to +40°C, IK07 impact resistance. Possibility of accessorising the station with pole support and galvanised steel plate. Compliant with CEI EN 61851-1, CEI EN 62196-2, CEI EN 61439-7, CEI EN 60304-7-722 standards and complete with CE marking.

InfoTECH - Ficha Técnica Detallada [EN]

Esquema eléctrico

InfoTECH - Ficha Técnica Detallada [IT]