Catalogue
Scame Catalogue
FLUSH MOUNTING APPLIANCE INLET
16A 3P+E 6h 380-415V 50Hz 60Hz 75X75MM Screw terminals With REVERSE device
COD.
243.1696RV
OPTIMA-REVERSE is a range of 16A and 32A flush mounting industrial inlets that allow the rapid reversal of two phases to restore the correct direction of rotation for three-phase motors of mobile and fixed loads. The inversion of the phases is done simply by pushing and turning with a screwdriver the support where the two phase pins are mounted. The efficiency of the contacts over time is guaranteed by the use of nickel-plated brass pins, resistant to oxidation and aging, while the IP degree stability is ensured by the co-moulded gasket. The OPTIMA-REVERSE Series inlets do not neglect the environmental aspect, being produced with halogen-free materials.
Notes
- Phase inverter
- Operating principle of the phase inverter
TechData
Product type
FLUSH MOUNTING APPLIANCE INLET
Commercial series
OPTIMA-REVERSE Series
Synthetical description
FLUSH MOUNTING APPLIANCE INLET
Mounting version
FLUSH MOUNTING
Rated current
16A
Poles
3P+E
Hour position
6h
Rated voltage (range)
250-400V
Rated voltage
380-415V
Working frequency
50Hz
60Hz
Colour
RED
Material
THERMOPLASTIC
Protection degree
Splash proof
Protection degree IP
IP44/IP54
Protection degree IK
IK08
Types of available outlets
STRAIGHT
Terminals
Screw terminals
Contact material
CuZn (brass)
Surface treatment contacts
Nickel-plated
Flange
75X75MM
Options
With REVERSE device
Standards and Laws
EN 60309-1 (1999)
[European Standard] Plugs, socket-outlets and couplers for industrial purposes. Part 1: General requirements
EN 60309-2 (1999)
[European Standard] Plugs, socket-outlets and couplers for industrial purposes. Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories of harmonized configurations
EN 60309-1/A1 (2007)
[European Standard] Plugs, socket-outlets and couplers for industrial purposes. Part 1: General requirements
EN 60309-2/A1 (2007)
[European Standard] Plugs, socket-outlets and couplers for industrial purposes. Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories of harmonized configurations
DIRECTIVE LOW VOLTAGE 2014/35/UE
[European Directives] Low Voltage Directive
MASTER DATA
Quantity:
10 nr
Net weight:
0.132 KG
EAN code:
8001636234595
INTRASTAT code:
85366990
Carton
Quantity:
50
EAN code:
8001636686288
Volume:
36012.5 CCM
Height:
430.0 MM
Length:
250.0 MM
Width:
335.0 MM
Gross weight:
7.650 KG
Box
Quantity:
10
EAN code:
8001636686271
Volume:
5428.0 CCM
Height:
160.0 MM
Length:
115.0 MM
Width:
295.0 MM
Gross weight:
1.530 KG