Scame Catalogue

FLUSH MOUNTING APPLIANCE INLET

63A 2P+E 9h 380-415V 50Hz 60Hz 100X110MM Mantle terminals


COD. 243.6398  

OPTIMA is a complete range of flush mounting industrial appliance inlets from 16A up to 125A Robust and safe industrial inlets thanks to the use of high performance technopolymer enclosures. The inlets of the OPTIMA series are available with multiple types of terminals (screw type for currents up to 32A and mantle type in the 63 and 125A versions) to always guarantee the best connection according to the type of use and the wiring needs. The efficiency of the contacts over time is also guaranteed by the use of nickel-plated brass pins, resistant to oxidation and aging. The unloseable co-moulded gasket is a guarantee of a constant seal of the IP protection degree. The OPTIMA Series inlets do not neglect the environmental aspect, being produced with halogen-free materials.


TechData
Commercial series
OPTIMA Series
Synthetical description
FLUSH MOUNTING APPLIANCE INLET
Mounting version
FLUSH MOUNTING
Rated current
63A
Poles
2P+E
Hour position
9h
Rated voltage (range)
250-400V
Rated voltage
380-415V
Working frequency
50Hz
60Hz
Colour
RED
Material
THERMOPLASTIC
Protection degree
Splash proof
Protection degree IP
IP44/IP54
Protection degree IK
IK08
Types of available outlets
STRAIGHT
Terminals
Mantle terminals
Contact material
CuZn (brass)
Surface treatment contacts
Nickel-plated
Flange
100X110MM
Standards and Laws
EN 60309-1 (1999)
[European Standard] Plugs, socket-outlets and couplers for industrial purposes. Part 1: General requirements
EN 60309-2 (1999)
[European Standard] Plugs, socket-outlets and couplers for industrial purposes. Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories of harmonized configurations
EN 60309-1/A1 (2007)
[European Standard] Plugs, socket-outlets and couplers for industrial purposes. Part 1: General requirements
EN 60309-2/A1 (2007)
[European Standard] Plugs, socket-outlets and couplers for industrial purposes. Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories of harmonized configurations
EN 60309-1/A2 (2012)
[European Standard] Plugs, socket-outlets and couplers for industrial purposes. Part 1: General requirements
EN 60309-2/A2 (2012)
[European Standard] Plugs, socket-outlets and couplers for industrial purposes. Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories of harmonized configurations
DIRECTIVE LOW VOLTAGE 2014/35/UE
[European Directives] Low Voltage Directive
MASTER DATA
Quantity:
10 nr
Net weight:
0.000 KG
EAN code:
8001636004440
INTRASTAT code:
85366990
Carton
Quantity:
10
EAN code:
8001636881485
Volume:
21756.0 CCM
Height:
140.0 MM
Length:
370.0 MM
Width:
420.0 MM
Gross weight:
0.000 KG

scame-technical-sheets