Scame Catalogue

FLUSH MOUNTING APPLIANCE INLET

16A 3P+E 3h 380V 50Hz / 440V 60Hz 50Hz 60Hz 70X87MM Screw terminals


COD. 242.16964  

EUREKA is a range of 16 and 32A flush mounting industrial inlets with 90° angled cable outlet. The design of the inlet has the advantage of a reduced protrusion, thus preventing any damage due to accidental contacts. The efficiency of the contacts over time is guaranteed by the use of nickel-plated brass pins, resistant to oxidation and aging, while the IP degree stability is ensured by the co-molded gasket.


TechData
Commercial series
EUREKA Series
Synthetical description
FLUSH MOUNTING APPLIANCE INLET
Mounting version
FLUSH/SURFACE MOUNTING
Rated current
16A
Poles
3P+E
Hour position
3h
Rated voltage (range)
250-400V
Rated voltage
380V 50Hz / 440V 60Hz
Working frequency
50Hz
60Hz
Colour
RED
Material
THERMOPLASTIC
Protection degree
Splash proof
Protection degree IP
IP44
Protection degree IK
IK07
Types of available outlets
90° ANGLED
Terminals
Screw terminals
Contact material
CuZn (brass)
Surface treatment contacts
Nickel-plated
Flange
70X87MM
Cable entry
PG 16
Standards and Laws
EN 60309-1 (1999)
[European Standard] Plugs, socket-outlets and couplers for industrial purposes. Part 1: General requirements
EN 60309-2 (1999)
[European Standard] Plugs, socket-outlets and couplers for industrial purposes. Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories of harmonized configurations
EN 60309-1/A1 (2007)
[European Standard] Plugs, socket-outlets and couplers for industrial purposes. Part 1: General requirements
EN 60309-2/A1 (2007)
[European Standard] Plugs, socket-outlets and couplers for industrial purposes. Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories of harmonized configurations
EN 60309-1/A2 (2012)
[European Standard] Plugs, socket-outlets and couplers for industrial purposes. Part 1: General requirements
EN 60309-2/A2 (2012)
[European Standard] Plugs, socket-outlets and couplers for industrial purposes. Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories of harmonized configurations
DIRECTIVE LOW VOLTAGE 2014/35/UE
[European Directives] Low Voltage Directive
DIRECTIVE RoHS 2011/65/EU
[European Law] Restriction of the use of certain hazardous substances in electrical and electronic equipment
MASTER DATA
Quantity:
10 nr
Net weight:
0.175 KG
EAN code:
8001636000497
INTRASTAT code:
85366990
Carton
Quantity:
100
EAN code:
8001636874548
Volume:
0.0
Height:
0.0
Length:
0.0
Width:
0.0
Gross weight:
20.100 KG
Box
Quantity:
10
EAN code:
8001636874562
Volume:
0.0
Height:
0.0
Length:
0.0
Width:
0.0
Gross weight:
2.010 KG

scame-technical-sheets