Scame Catalogue

Wall Box made of thermoplastic material and painted steel sheet, for wall mounting, equipped with 1 Type 2 1P+N+T 32A 230 Vac 7 kW socket with safety shutter in compliance with IEC/EN 62196-2

Suitable for charging electric vehicles in «mode 3» in compliance with EN61851-1. Equipped with RFID Card for user identification and management. Performs like a column but more compact

Charging station with sockets equipped with special plug locking system, Type 2 socket with exclusive anti-vandal access system. Resistant to UVA rays, high degree of protection against dust and water (IP54), shock resistant according to IK10. Possibility

COD. 204.WD11B-T2

Wall box in thermoplastic material and painted steel sheet, suitable for wall mounting. The Wall Box "WD" is particularly suitable for installation in public places and in particular where a column would be appropriate but there is no space for floor installation.
The box comes standard with the exclusive Type 2 anti-vandal socket and also has a high resistance to UVA rays, a high degree of protection (IP54) to water and dust and a very high impact resistance according to IK10.
The Wall Box "WD" can be equipped with local user recognition systems (RFID card readers) or remote systems with integration in management systems (with OCPP communication protocol) that also allow user identification through Smartphones with the use of dedicated apps.
It is suitable for "mode 3" charging and can be equipped with a maximum of 2 sockets (1 each side) with a maximum output of up to 22 kW per outlet.
For outdoor installation it is also possible to accessorise the Wall Box "WD" with a pole support and fixing plate.
The Wall Box "WD" complies with IEC/EN 61851-1.

TechData

Product type

WALL BOX 1 SOCKET WITH LOCK

Commercial series

LIBERA Series

Synthetical description

WALL BOX 1 SOCKET WITH LOCK

Material

ENGINEERING PLASTIC

EV standard

Type 2 1P+N+E 32A 230V~ 7,4kW

Rated current

32A

Rated voltage

230V

Working frequency

50/60Hz

Poles

1P+N+E

Protection degree IP

IP54

Working temperature

-30°C/+50°C

GLOW WIRE

GW 650°C

Protection degree IK

IK10

Colour

GREY

Saline solution

Resistant

UV protection

UV resistant

Mounting version

SURFACE MOUNTING

Dimensions

360x780x264mm

EV functions

WRK IN MODE STD-AL.FREE/PERS.

CHARGE MODE 3 WITH PWM C.PILOT

ID. OF CONNECTED CORD-SET SIZE

PR. AGAIN.OVERCUR. & EL. SHOCK

PR. AGAI.DIR.CON.SF.CHILD SHUT

EN. MET. AND CURRENT CONSUMP.

IDENTIF. OF AUTHORIZED USER

MAN. OF LID LOCK. & LATCH. SYS

CHARGE MAN. IN CASE OF PWR OUT

PREDISP. FOR SERIAL COMMUN.

EV equipment

1 DIGIT. ENERGY METER 1P+N 40A

1 BACKUP BATTERY

1 STOP CHARGE P.BTN (M. FREE)

1 READER RFID 13,56MHZ

1 LCD DISP. 2X20 ROWS BCKLIGHT

1 CONTROL CARD

1 POWER SUPPLY 24VDC 36W

1 FUSE HOLDER 1P+N GG 4A

1 DC LEAKAGE DETECTOR

1 MOD. CONTACT. 2P 40A 24VDC

1 CI.BRK. 1P+N C40 30MA IST. A

1 TERMINAL STRIP 3X35MM²

1 LIGHTING BAR WITH RGB LED

EV specifications

204.WD11B-T2

Standards and Laws

IEC 61439-7 (2018)

[International Standard] Low-voltage switchgear and controlgear assemblies - Part 7: Assemblies for specific applications such as marinas, camping sites, market squares, electric vehicle charging stations

EN IEC 61851-1 (2019)

[European Standard] Electric vehicle conductive charging system - Part 1: General requirements

DIRECTIVE LOW VOLTAGE 2014/35/UE

[European Directives] Low Voltage Directive

DIRECTIVE EMC 2014/30/UE

[European Directives] Electromagnetic Compatibility Directive

MASTER DATA

Quantity:

1 nr

Net weight:

11.700 KG

EAN code: