Scame Catalogue

SURFACE MOUNT. APPLIANCE INLET

16A 3P+N+E 6h 346-415V 50Hz 60Hz Screw terminals With REVERSE device


COD. 245.1697RV  

OPTIMA-REVERSE is a range of surface mounting industrial inlets 16 and 32A that allow the rapid inversion of two phases to restore the correct direction of rotation for three-phase motors of mobile and fixed users, simply by pushing and turning with a screwdriver the support where the two phase pins are mounted. Practical thanks to the use of screw terminals and the metric threaded entry on the upper side The efficiency of the contacts over time is guaranteed by the use of nickel-plated brass pins, resistant to oxidation and aging, while the IP degree stability is ensured by the co-moulded gasket.


Notes

  • Cable gland included
  • Open threaded cable entry
  • Threaded break-through knock out

TechData
Commercial series
OPTIMA-REVERSE Series
Synthetical description
SURFACE MOUNT. APPLIANCE INLET
Mounting version
SURFACE MOUNTING
Rated current
16A
Poles
3P+N+E
Hour position
6h
Rated voltage (range)
250-400V
Rated voltage
346-415V
Working frequency
50Hz
60Hz
Colour
RED
Material
THERMOPLASTIC
Protection degree
Watertight
Protection degree IP
IP66/IP67/IP69
Protection degree IK
IK08
Types of available outlets
ANGLED
Terminals
Screw terminals
Contact material
CuZn (brass)
Surface treatment contacts
Nickel-plated
Cable entry
M25X1,5
Options
With REVERSE device
Standards and Laws
EN 60309-1 (1999)
[European Standard] Plugs, socket-outlets and couplers for industrial purposes. Part 1: General requirements
EN 60309-2 (1999)
[European Standard] Plugs, socket-outlets and couplers for industrial purposes. Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories of harmonized configurations
EN 60309-1/A1 (2007)
[European Standard] Plugs, socket-outlets and couplers for industrial purposes. Part 1: General requirements
EN 60309-2/A1 (2007)
[European Standard] Plugs, socket-outlets and couplers for industrial purposes. Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories of harmonized configurations
EN 60309-1/A2 (2012)
[European Standard] Plugs, socket-outlets and couplers for industrial purposes. Part 1: General requirements
EN 60309-2/A2 (2012)
[European Standard] Plugs, socket-outlets and couplers for industrial purposes. Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories of harmonized configurations
DIRECTIVE LOW VOLTAGE 2014/35/UE
[European Directives] Low Voltage Directive
MASTER DATA
Quantity:
10 nr
Net weight:
0.258 KG
EAN code:
8001636332758
INTRASTAT code:
85366990
Carton
Quantity:
10
EAN code:
8001636767147
Volume:
15840.0 CCM
Height:
180.0 MM
Length:
275.0 MM
Width:
320.0 MM
Gross weight:
2.950 KG

scame-technical-sheets