Scame Catalogue

Attachments

PDF
Technical Sheet
ZD3
Instruction manual
STP
Technical drawing [STP]
DWG
Technical drawing [DWG]
Z07
Technical drawing [PDF]
D2IT
InfoTECH - Detailed Data Sheet [IT]
D2EN
InfoTECH - Detailed Data Sheet [EN]

WALL BOX 1 SOCKET TYPE 2

Type 2 3P+N+E 32A 400V~ 22kW 32A 400V 3P+N+E IP54 IK08


Smart Wall Box in halogen-free engineering plastics, for wall assembly, equipped with display and Type 2 socket, 3P+N+E 32A 400V, 22kW, fitted with safety shutters in compliance with standard IEC/EN 62196-2, equipped with Energy Meter, and RFID user identification and authorisation system.
Suitable for electric vehicle charging in «mode 3» in compliance with standard EN61851-1.

Version for domestic charging in absolute safety, featuring Power Management function, allowing the vehicle charging current to be adapted based on the user’s contractual power and the current absorbed by domestic loads, thus preventing the main meter from unexpectedly tripping.
The WEB-NET version allows remote monitoring through our standard Management System.

Exclusive design with «Dual Feel Sensitive» finish, highly resistant to UV rays, high-level IP54 protection against dust and water with the possibility for personalisation.

COD. 205.W69-D0  

The POWER MANAGEMENT version of the WALL BOX, compliant with «MODE 3» of the international standard IEC/EN 61851-1, is a charging station suitable for wall-mounted installation.
The process of charging an electric vehicle may absorb a good part, if not all of the electrical energy available to single users, which in the majority of Italian homes is typically 3 kW, thus running the risk of tripping the domestic meter.
To avoid this problem, the POWER MANAGEMENT function makes it possible to automatically limit the power allocated to vehicle charging based on the user's contractual power and the power used within the home, thus preventing the meter from unexpectedly tripping.
Thanks to this function, it will no longer be necessary to increase the electricity supply agreement for your home. The device is also able to manage the current produced by photovoltaic systems.

TechData
Commercial series
BE-W Series
Synthetical description
WALL BOX 1 SOCKET TYPE 2
Material
ENGINEERING PLASTIC
EV standard
Type 2 3P+N+E 32A 400V~ 22kW
Rated current
32A
Rated voltage
400V
Working frequency
50/60Hz
Poles
3P+N+E
Protection degree IP
IP54
Working temperature
-30°C/+50°C
GLOW WIRE
GW 650°C
Protection degree IK
IK08
Colour
ANTHRACITE
Mounting version
SURFACE MOUNTING
Dimensions
235x370x115mm
Standards and Laws
IEC 61439-7 (2018)
[International Standard] Low-voltage switchgear and controlgear assemblies - Part 7: Assemblies for specific applications such as marinas, camping sites, market squares, electric vehicle charging stations
EN IEC 61851-1 (2019)
[European Standard] Electric vehicle conductive charging system - Part 1: General requirements
DIRECTIVE LOW VOLTAGE 2014/35/UE
[European Directives] Low Voltage Directive
DIRECTIVE EMC 2014/30/UE
[European Directives] Electromagnetic Compatibility Directive
MASTER DATA
Quantity:
1 nr
Net weight:
4.412 KG
EAN code:
8001636447803
INTRASTAT code:
85371098
Carton
Quantity:
1
EAN code:
Volume:
28672.0 CCM
Height:
140.0 MM
Length:
320.0 MM
Width:
640.0 MM
Gross weight:
5.449 KG

scame-technical-sheets