THE WORLD
OF SCAME

Italy

Parre (Bergamo)

Please, select your language

Поиск товаров


Navigator

   
DETAILS OF TECHNICAL STANDARDS

IEC 61851-1

Electric vehicle conductive charging system
Part 1: General requirements

Год файл Публикация SCAME
2010-11-25 ed. 2.0 N160
       

International Standard

 

Contents
(courtesy IEC)

Applies to on-board and off-board equipment for charging electric road vehicles at standard a.c. supply voltages (as per IEC 60038) up to 1 000 V and at d.c. voltages up to 1 500 V, and for providing electrical power for any additional services on the vehicle if required when connected to the supply network.

It includes characteristics and operating conditions of the supply device and the connection to the vehicle; operators and third party electrical safety, and the characteristics to be complied with by the vehicle with respect to the a.c./d.c. EVSE, only when the EV is earthed.
This second edition cancels and replaces the first edition published in 2001.

It constitutes a technical revision.
The main changes with respect to the first edition of this standard are:
- revision of connector definitions and current levels (Clause 8);
- modification definition of pilot wire to pilot function;
- division of Clause 9 to create Clauses 9 and 11;
- Clause 9: specific requirements for inlet, plug and socket-outlet;
- Clause 11: EVSE requirements: the basic generic requirements for charging stations;
- renumbering of annexes;
- deletion of previous Annex A and integration of charging cable requirements into new Clause 10;
- Annex B becomes Annex A and is normative for all systems using a PWM pilot function with a pilot wire; Annex C becomes Annex B;
- replacement of previous Annex D (coding tables for power indicator) with B.4 in Annex B using new values;
- new informative Annex C describing an alternative pilot function system.

This publication is of high relevance for Smart Grid.

 



Active







"CROSS REFERENCE"
by SCAME


The main Standards
related to IEC 61851-1


 

Corresponding European standards
EN 61851-1Electric vehicle conductive charging system
Part 1: General requirements
 
Corresponding International standards
No data available
 
Organizations and Institutions
IECInternational Electrotecnical Commission
[International Standard]
 
Other related IEC Standards
IEC 61851-1 Electric vehicle conductive charging system
Part 1: General requirements
IEC 61851-22 Electric vehicle conductive charging system
Part 22: AC electric vehicle charging station
IEC 62196-1 Plugs, socket-outlets, vehicle couplers and vehicle inlets
Conductive charging of electric vehicles
Part 1: Charging of electric vehicles up to 250 A a.c. and 400 A d.c.
IEC 62196-2 Plugs, socket-outlets and vehicle couplers
Conductive charging of electric vehicles
Part 2: Dimensional interchangeability requirements for a.c. pin and contact-tube accessories
 
Thematic collection
Electric Vehicle

 


Back to index











The "Suggestion"
by SCAME


The main Scame products
related to the requirements of the standard IEC 61851-1


 

DOMINO IP66 Series
for generic use


DOMINO System
Modular systems for distribution assemblies and consumer units


LIBERA Series
Connettori per veicoli elettrici


MBOX Series
for construction site



See also the
Главный каталог

 

Rev.17.0206      

 

Share
 
 
 
Hоиск
Text:
Поиск по коду:
Поиск по описанию:
 
 
Утилита
Выясните как найти из тысяч конфигураций, Комбинацию устройства для Вас.
Узнайте совместимые изделия с корпусами Scame.
 
 
Pеклама
 

 
 
 
 

Поиск - Язык [] - Карта сайта - Контакты - Privacy - Правовая информация
©2005-2017 - SCAME PARRE S.p.A. - P.IVA IT 00137900163 - Active users: 1140