THE WORLD
OF SCAME

Italy

Parre (Bergamo)

Please, select your language

Ricerca prodotto


Navigator

   
SCHEDA NORMA TECNICA

IEC 61851-1

Electric vehicle conductive charging system
Part 1: General requirements

ANNO FASCICOLO EDIZIONE SCAME
2010-11-25 ed. 2.0 N160
       

International Standard

 

Sommario
(per gentile concessione IEC)

Applies to on-board and off-board equipment for charging electric road vehicles at standard a.c. supply voltages (as per IEC 60038) up to 1 000 V and at d.c. voltages up to 1 500 V, and for providing electrical power for any additional services on the vehicle if required when connected to the supply network.

It includes characteristics and operating conditions of the supply device and the connection to the vehicle; operators and third party electrical safety, and the characteristics to be complied with by the vehicle with respect to the a.c./d.c. EVSE, only when the EV is earthed.
This second edition cancels and replaces the first edition published in 2001.

It constitutes a technical revision.
The main changes with respect to the first edition of this standard are:
- revision of connector definitions and current levels (Clause 8);
- modification definition of pilot wire to pilot function;
- division of Clause 9 to create Clauses 9 and 11;
- Clause 9: specific requirements for inlet, plug and socket-outlet;
- Clause 11: EVSE requirements: the basic generic requirements for charging stations;
- renumbering of annexes;
- deletion of previous Annex A and integration of charging cable requirements into new Clause 10;
- Annex B becomes Annex A and is normative for all systems using a PWM pilot function with a pilot wire; Annex C becomes Annex B;
- replacement of previous Annex D (coding tables for power indicator) with B.4 in Annex B using new values;
- new informative Annex C describing an alternative pilot function system.

This publication is of high relevance for Smart Grid.

 



Norma in vigore







"CROSS REFERENCE"
by SCAME


Le principali normative
relazionate alla IEC 61851-1


 

Corrispondenti norme europee
EN 61851-1Electric vehicle conductive charging system
Part 1: General requirements
 
Corrispondenti norme internazionali
Nessun dato presente
 
Ente normatore
IECInternational Electrotecnical Commission
[International Standard]
 
Altre norme IEC correlate
IEC 61851-1 Electric vehicle conductive charging system
Part 1: General requirements
IEC 61851-22 Electric vehicle conductive charging system
Part 22: AC electric vehicle charging station
IEC 62196-1 Plugs, socket-outlets, vehicle couplers and vehicle inlets
Conductive charging of electric vehicles
Part 1: Charging of electric vehicles up to 250 A a.c. and 400 A d.c.
IEC 62196-2 Plugs, socket-outlets and vehicle couplers
Conductive charging of electric vehicles
Part 2: Dimensional interchangeability requirements for a.c. pin and contact-tube accessories
 
Area tematica
Veicolo elettrico

 


Torna all'indice











La "Proposta"
di SCAME


I principali prodotti Scame
correlati alle prescrizioni della norma IEC 61851-1


 

Serie DOMINO IP66
per uso generico [IP66]


Sistema DOMINO
Sistemi modulari per centralini e quadri


Serie LIBERA
Connettori per veicoli elettrici


Serie MBOX
per il cantiere [IP66]



Vedi anche il
CATALOGO GENERALE

 

Rev.17.0206      

 

Share
 
 
  Installatore
15 settembre 2017
31 dicembre 2017


3,27 Mb

Keep Calm and go shopping

Ricevi in omaggio un buono acquisto Amazon dal valore di € 20,00



 
 
 
Ricerca
Testo:
Codice:
Descrizione:
 
 
Utility
Scopri come trovare tra migliaia di configurazioni il quadro giusto per te.
Individua i prodotti compatibili con gli involucri preforati Scame.
 
 
Advertising
 

 
 
 
 

Cerca - Language [] - Site Map - Contact - Privacy - Legal Notice
©2005-2017 - SCAME PARRE S.p.A. - P.IVA IT 00137900163 - Active users: 465