THE WORLD
OF SCAME

Italy

Parre (Bergamo)

Please, select your language

Buscar producto


Navigator

   
FICHAS DE LAS NORMAS TÉCNICAS

EN 61851-1

Electric vehicle conductive charging system
Part 1: General requirements

AÑO FILE EDICIÓN SCAME
2011 N185
       

European Standard

 

Contenidos
(cortesía CENELEC)

Applies to on-board and off-board equipment for charging electric road vehicles at standard a.c. supply voltages (as per IEC 60038) up to 1 000 V and at d.c. voltages up to 1 500 V, and for providing electrical power for any additional services on the vehicle if required when connected to the supply network.

It includes characteristics and operating conditions of the supply device and the connection to the vehicle; operators and third party electrical safety, and the characteristics to be complied with by the vehicle with respect to the a.c./d.c. EVSE, only when the EV is earthed.
This second edition cancels and replaces the first edition published in 2001.

It constitutes a technical revision.
The main changes with respect to the first edition of this standard are:
- revision of connector definitions and current levels (Clause 8);
- modification definition of pilot wire to pilot function;
- division of Clause 9 to create Clauses 9 and 11;
- Clause 9: specific requirements for inlet, plug and socket-outlet;
- Clause 11: EVSE requirements: the basic generic requirements for charging stations;
- renumbering of annexes;
- deletion of previous Annex A and integration of charging cable requirements into new Clause 10;
- Annex B becomes Annex A and is normative for all systems using a PWM pilot function with a pilot wire; Annex C becomes Annex B;
- replacement of previous Annex D (coding tables for power indicator) with B.4 in Annex B using new values;
- new informative Annex C describing an alternative pilot function system.

This publication is of high relevance for Smart Grid.

 



Activo







"CROSS REFERENCE"
by SCAME


Las principales normas
relacionadas con la EN 61851-1


 

Correspondientes normas europeas
No hay datos disponibles
 
Correspondientes normas internacionales
IEC 61851-1Electric vehicle conductive charging system
Part 1: General requirements
 
Organizaciones e Instutuciones
CENELECEuropean Committee for Electrotechnical Standardization
[European Standard]
 
Otras normas relacionadas CENELEC
EN 61851-1 Electric vehicle conductive charging system
Part 1: General requirements
EN 61851-23 Electric vehicle conductive charging system
Part 23: DC electric vehicle charging station
EN 62196-1 Plugs, socket-outlets, vehicle couplers and vehicle inlets
Conductive charging of electric vehicles
Part 1: Charging of electric vehicles up to 250 A a.c. and 400 A d.c.
EN 62196-2 Plugs, socket-outlets and vehicle couplers
Conductive charging of electric vehicles
Part 2: Dimensional interchangeability requirements for a.c. pin and contact-tube accessories
 
Collección temática
Vehículos Eléctricos

 


Volver al índice











La "Sugerencia"
de SCAME


Los principales productos Scame
relacionados con los requisitos de la norma EN 61851-1


 

Serie DOMINO IP66
utilization general


Sistema DOMINO
Sistemas modulares cuadros de distribución


Serie LIBERA
Connettori per veicoli elettrici


Serie MBOX
utilizada en las obras



Véase también el
CATÁLOGO GENERAL

 

Rev.17.0206      

 

Share
 
 
 
Búsqueda
Testo:
Código:
Descripción:
 
 
Utilidad
Aprende a encontrar entre miles de configuraciones, el quadro para usted.
Identifica los productos compatibles con el Scame material.
 
 
Publicidad
 

 
 
 
 

Búsqueda - Language [] - Site Map - Contact - Privacy - Legal Notice
©2005-2017 - SCAME PARRE S.p.A. - P.IVA IT 00137900163 - Active users: 688