THE WORLD
OF SCAME

Italy

Parre (Bergamo)

Please, select your language

Search product


Navigator

   

SERIES DETAILS

OMNIA System
Flush and surface mounting modular system


 

GENERAL DESCRIPTION


Highly suited to installation needs in premises that require industrial sockets but where protrudion from the wall must be kept to a minimum, such as in kitchens, bars, bublic places, shops and business premises in general.

ScameThe OMNIA System includes:

a flush mounting box

a surface mounting

 

The flush mounting box, wich is suitable for walled installations, can be combined both horizontally and them together thanks to a special coupling insert. This also allows the cable to move easily from are box to the next.

The wall mounting box is designed for small external installations IP55.

In the same flush or surface mounting box 16A and 32A interlocked-switch socket outlets in OMNIA Series IP44 or IP55 can be mounted

omnia09.jpg (79028 byte)

omnia09.jpg (79028 byte)

Example of a flush mounting combination: consumer unit, junction box and OMNIA Series interlocked-switch socket outlet. IP55 weatherproof.

Example of a surface mounting combination: consumer unit and OMNIA Series interlocked-switch socket outlet.
IP55 weatherproof.

 

VERSIONS


Both flush and surface mounting boxes can house:

  • A flush mounting interlocked-switch socket outlet,
    OMNIA series from 16 to 32A, IP44 or IP67
  • A consumer unit
    up to 6 DIN modules
  • A blank cover
    to provide a junction box

A pratical frame gives the flush mounted installation a degree of finish and an attractive appearance.

The design of the OMNIA System box enables it to change its functions as required, for example changing from a junction box to a consumer unit, from a consumer unit to an unterlocked-switch socket outlet, etc.

Scame Scame
Flush mounting combination unit Flush mounting combination with OMNIA Series interlocked-switch socket outlet.

 

STRUCTURAL CHARACTERISTICS


Flush mounting box

  • a single box can be used for housing any of the interlocked-switch socket outlets of the OMNIA Series or for a 6 (*) DIN mpodules consumer unit or for making up a junction box by using a blank cover.
  • 4 rectangular knock-out side enties 53x40mm
  • 4 34mm diameter entries that can be knocked out at the bottom
  • coupling insert to provide a passage for the wires from one box to the next without reqiring pipes, and for perfect alignment between the boxes.

 

Surface mounting box

  • a single box suitable for housing any of the interlocked-switch sockets outlets of the OMNIA Series or a consumer unit for 6 (*) DIN modules (17,5mm) or for making up a kunction box by using a blank cover.
  • Surface mounting by means of 4 slotted holes for easier centring or panel mounting by means of holes for easier centring or panel mounting by means of holes on the back of the box.
  • Knockout holes on all sides
    top: n° 2 PG16 23 and n° 1 PG21 29
    sides: n° 2 PG16 23
    bottom: n° 1 PG16 23
    end: n° 2 PG16 23

  • (the boxes may be used upside down)

  • 2 notches for fastening the EN50022 rail

  • draining holes on all four sides

  • Double insulation (use the bottom insulating caps supplied)

 

TECHNICAL CHARACTERISTICS


  • Protection degree IP55 to IEC 529 CEI 70-1
  • Double insulation (use the bottom insulating caps supplied)
  • Made of halogen-free self-extinguishing thermoplastic material. RAL 7035 gray, abnormal heat and fire resistant up to 650°C (glow-wire test to IEC 695-2-1).
  • Dimensional stability in continuos operation from -20°C to +85°C.
  • Impact resistance: 6 Joule
  • Resistance to chemicals (water, saline solutions, acids, bases, mineral oils) end weathering.
  • Possibilità di installazione in ambienti a maggior rischio in caso di incendio (CEI 64-8) e in ambienti AD-FT (CEI 64-2).
  • Stainless steel quick screwing locking screws.
  • Non-ageing elastomer seals.
  • Compliance with CEI 23-48 and CEI 23-49, IEC 670 (only for boxes coupled to the consumer unit or with blank cover)

Scame Flush mounting installation

 

ACCESSORIES


The OMNIA System comes complete with a kit with all fittings for installation.
Depending on the product purchased, the kit includes the coupler for joining together the surface mounting boxes, fastening screws and seals, the EN50022 (17,5mm),rail if required, instructions and any other parts necessary for a proper installation.

a protective cover is also available for ensuring IP20 on the back of the OMNIA Series interlocked-switch socket outlet when panel mounted.

 

 

REFERENCE STANDARDS



CEI 23-49
Enclosure for accessories for household and similar fixed electrical installations.
Part 2: particular requirements for enclosures for protection devices and accessories dissipating a considerable power in normal use.

EN 60670-1
Boxes and enclosures for electrical accessories for household and similar fixed electrical installations.
Part 1: General requirements.


 

 

 

TECHNICAL DATA SHEET



Protection degree IP44-IP55-IP66

Operating temperature according to the reference standard -25°C +35°C

Maximum operating temperature 60°C

Glow Wire test 650°C / 850°C

Material Engineering plastic

Impact resistance: IK degree at 20°C IK08

Total insulation Yes (Class II)

Cable inlets PG/METRIC

Colour Grey RAL 7035


 

 

 

BEHAVIOUR WITH CHEMICAL AND ATMOSPHERIC AGENTS



Saline solution Resistant

Acids Concentrated Limited resistance
Diluted Resistant

Bases Concentrated Limited resistance
Diluted Resistant

Solvents Hexane Not resistant
Benzol Not resistant
Acetone Not resistant
Alcohol Limited resistance

Mineral oil Limited resistance

UV rays Resistant


 

 

InfoTECH
SERIES TECHNICAL SHEETS


Reference Description Language Size Download
ZP01000-GB-1 OMNIA System
Flush and surface mounting modular system
English 343 kb


All series technical sheets

 

 

 

NEWS




19/6/2015
OMNIA System - Knock outs replacement with self-centering punch marks on boxes for surface mounting interlocked sockets OMNIA Series 16A and 32A.


20/4/2015
OMNIA System: knock outs replacement with self-centering punch marks on boxes 572.M0308 for surface mounting interlocked sockets OMNIA Series 63A.


29/11/2012
OMNIA System: flush mounting box for plasterboard walls


11/7/2011
OMNIA System – 4-socket container with switchboard


All news

 

ADVERTISING


Advertising Description  
ZOOM Ref.:
ZA00152-IT-2
Year of pubblication:
2003
  .PDF
Target: Italian market
Subject: OMNIA System
Head: The heart of Scame systems is called Omnia.
Body: Domino system and Omnia flush mounting socket outlets. The system within the system.


All advertising

 

 

 

Rev.16.1024      

 

Share
 
 
 
Search
Text:
Code:
Description:
 
 
Utility
Discover how to find in thousands configurations, the Combination unit for you.
Identifies the products compatible with Scame material.
 
 
Advertising
 

 
 
 
 

Search - Language [] - Site Map - Contact - Privacy - Legal Notice
©2005-2017 - SCAME PARRE S.p.A. - P.IVA IT 00137900163 - Active users: 633