THE WORLD
OF SCAME

CONNECTO Series
Connecting accessories

GENERAL DESCRIPTION

For safe and reliable wiring SCAME offers a range of wire connectors, insulated wire connector strips, multi-way wire connectors and terminal strips capable of meeting all needs of present-day wiring systems in the home, office, shop or factory.

• Insulated wire connectors - T85
• Insulated wire connectors - T85 strips 10
• Multi-way wire connectors - T85
• Terminal strips - T85
• Terminal strips - T140

INSULATED WIRE CONNECTORS - T85

The main characteristics of these devices are:

• rated voltage: 450V~
• capacity: 1,5 2,5 4 6 10 16 35 (mm2)
• rated current: 17,5 24 41 57 76 125 (A)
• connectable cross-sections of rigid and flexible cables: between 0,75 and 50 mm2(refer to tables on following pages)
• maximum continuous service temperature: 85°C
• protection degree of the terminals: IP20 (with wires connected)

SCAME's insulated wire connectors have clear or coloured che insulating casing. The clear casings provide the advance of allowing visual control of the connections,, while the coloured ones make for faster identification of the circuits.

The insulated wire connector are widely used for wiring purposes inside junction boxes and panels and for temporary connections in low voltage electrical systems.

With the pratical strip version, the wiring is also vry neat.

MULTI-WAY
WIRE CONNECTORS - T85

Various versions are available, for equi-potential points, for earthing, in-out connections - easy and quick cabling for modern installations.

The main characteristics are:

• rated voltage: 450V~
• capacity: 6 16 35 (mm2)
• rated current: 41 76 125 (A)
• connectable cross-sections of rigid and flexible cable: between 1 and 35 mm2
• maximum continuos service temperature: 85°C
• protection degree of terminals IP 20 (with wires connected)

POLE TERMINAL STRIP

SCAME produces three versions of 12 pole rerminal strips withdifferent technical characteristics

TERMINAL STRIPS T140

The main characteristics of the terminals are:

• rated voltages: 250 /450 /750 V~ (according to size)
• capacity: 2,5 4 6 10 16 25 35 mm2
• rated current: 24 32 57 76 101 125 A
• connectable cross-sections of rigid and flexible cables: between 0,75 and 35 mm2 (refer to the "connecting capacity" tables on the following pages)
• maximum continuous service temperature: 140°C
• protection degree of the terminals: IP20 (with wires connected)

TERMINAL STRIPS T85

The main characteristics of terminals are:

• rated voltage: 250 V~, 450 V~, 750 V~
• capacity: 2,5 4 6 10 16 25 35mm2
• rated current: 24 32 57 76 A
• connectable cross-sections of rigid and flexiblecables: between 0,75 and 16 mm2 (refer to the "connecting capacity" tables on the following pages)
• maximum continuous service service temperature: 85°C
• protection degree of the terminals: IP20 (with wires connected)

The T140 and T85 are widely used for wire connections inside distribution boards, light fixtures and for the connection of permanently installed electrical equipment.

The T140 and T85 terminal strips are all ENEC approved, they comply to the international Standards IEC 60998-1 and IEC 60998-2-1.

AVVERTENZE PER L'UTILIZZO (tradurre)

• Curare in modo particolare la preparazione dei terminali dei cavi da inserire nei morsetti dell'apparecchio, per evitare la riduzione delle distanze di isolamento tra gli stessi
• Serrare le viti dei morsetti con particolare cura per evitare surriscaldamenti che potrebbero provocare un incendio o il danneggiamento dei cavi
• Verificare sempre che la temperatura ambiente sia uguale o inferiore alla temperatura ambiente indicata sul prodotto