OMNIA Series
INTERLOCKED-SWITCH SOCKETS OUTLETS
FOR INDUSTRIAL APPLICATIONS
 |
General catalogue:
sez. 2.3: Interlocked-switch socket outlets |
Products:
fam. 400: IP44 panel mounting
fam. 405: IP67 panel mountingo
fam. 500: IP44 surface mounting
fam. 505: IP67 surface mounting
OMNIA System: Modular system |
GENERAL DESCRIPTION
.........................................................................................................................................................
OMNIA Series, in surface mounting and flush mounting versions without protective devices, is designed for industrial use could also be used commercially with its attractive appearance and reduced size.
OMNIA Series can be incorporated into:
 |
OMNIA Series
OMNIA Series surface mounting socket outlet. |
VERSIONS AVAILABLE
.........................................................................................................................................................
- Surface mounting
- Flush mounting and panel mounting
- Without fuse holder
- Rated voltage: up to 660V~
- Rated current: 16A and 32A
- Protection degree: IP44 and IP67.
OMNIA Series
Socket panel mounting 2P+T - 16A 6h - 220V~ |
| |
Surface
mounting box |
Rotary switch |
Socket |
Seal |
Stainless
steel screws |
 |
Earth
terminal |
Retaining
device |
Interlock |
Locking
ring |
Front
operator switching unit |
STRUCTURAL
CHARACTERISTICS
.........................................................................................................................................................
- Overal dimensions are the same for both 16A and 32A versions
- Surface mounting version can be installed in the modular base (module 136) of the ADVANCE System
- Flush mounting version with box of 70 mm depth, including frame to hide imperfections in the plastering (OMNIA System).
- Panel mounting version can be installed in DOMINO Series IP55
- On the back of the base of the surface mounting socket are bosses for fixing to the panel.
- There are knockouts for cable inlet in the base and in the following dimensions:
| |
Upper surface: |
|
n°1 PG 21 ø29mm and n°2 PG16 ø23mm |
| Lower surface: |
n°1 PG 21 ø29mm |
| Side surfaces: |
n°2 PG 16 ø23mm |
| Back surface: |
2 holes ø23mm |
- Possibility to block the switch in closed and open position.
- Mechanical interlock that prevents the switch from closing if the plug is not inserted, the extraction of the plug if the switch is closed and the opening of the socket outlet cover if the switch is closed
ACCESSORY
For panel mounting, a special covering that can be fixed with 2 screw and ensure protection degree IP 20 for the back part of the installation. |
 |
|
-
