DOMINO Series - IP66
CONSUMER UNITS AND ENCLOSURES
 |
DOMINO System:
Modular enclosures for consumer units and distribution units
General catalogue:
sez. 2.1: Enclosures for electric apparatus |
Products:
fam. 672: Modular enclosures
fam. 674: Elements
fam. 654: Accessories for distribution assemblies |
GENERAL DESCRIPTION
......................................................................................................................................................
Meets a large numbres of installation needs in industrial and similar premises. With a modern and attractive design it blends well into any seetting.
In version IP66, the DOMINO Systems offers a complete range of consumer units and sealed mounted enclosures for distribution assemblies. They are extremely flexible in the ways they can be used and may also be englarged
 |
MODULARITY
The system is composed of a series of MODULES that make up the different kinds of distribution assemblies and consumer units in the following dimensions:
MODULE 150
150x328x115 mm (HxWxD)
MODULE 250
250x328x140 mm (HxWxD)
MODULE 400
400x328x140 mm (HxWxD)
MODULE 550
enclosure 550x328x140 mm
MODULE 700
700x328x140 mm (HxWxD)
|
DETAILS
......................................................................................................................................................
Consumer units enclosures
Versions in 16-32-48-64 DIN modules offer the possibility of expanding the unit even after it has been installed.
Distribution assemblies enclosures
Versions in 16 DIN modules and
- blank panel
- front panel with cutouts to house:
OMNIA Series 16A and 32A interlocked-switch socket outlets
IEC 309 Series or EUREKA Series 16A panel mounting socket outlets
Consumer units.
They can house 16, 32, 48 and 64 DIN modules |
Boxeswith cutouts
They can house 3 to 6 socket outlets: IEC309 Series and EUREKA Series, both IP44 and IP67 or panel-mounting series for domestic use, IP44 |
Enclosures with cutouts.
They house 2 to 4 16A and 32 A locked-switch sockets of the OMNIA Series, IP44 and IP66. |
Enclosures with blank panel
For housing different types of electrical apparetus for special applications |
VERSIONS
......................................................................................................................................................
Module 150
- Enclosures with blanc cover
- Enclosures with cutouts to house 2 OMNIA Series 16A or 32A, interlocked-switch sockets utlets, IP44 or IP66
- Enclosures with cutouts to house 3 IEC 309 Series 16A sockets, IP44 or IP 67 or 3 domestic sockets 16 A IP44
Module 250
- 16 DIN modules consumer units
Module 400
- 32 DIN modules consumer unit
- 16 DIN modules distrbution box with blank panel
- 16 DIN modules distribution box and housing with cutiuts to container 2 OMNIA Series 16A or 32A interlocked switch socket outlets, IP44 or IP66 .
- 16 DIN modules distribution box with cutouts to house 3 IEC 309 Series 16A sockets, IP44 or IP67 or 3 domestic socket 16 A IP44 o IP67.
Module 550
- 48 DIN modules consumer units
- 16 DIN modules distribution box with double blank panel.
- 16 DIN modules distribution box with cutouts to contain 4 OMNIA Series 16A or 32A interlocked switch socket outlets, IP44 or IP66.
- DIN mosules distribution box with cutouts to house 6 IEC309 Series 16A sockets, IP44 or IP67 or 3 domestic socket 16 A IP44.
Module 700
- 64 DIN modules consumer unit
 |
Hinges:
should be snap-fitted into their guides, can be mounted on the left or the right side, in the series versions 12 to 64 DIN modules |
Dispositivi di connessione:
I dispositivi di connessione multipolari consentono un rapido e ordinato cablaggio dei circuiti di terra, di neutro e di fase.
Possono essere fissati indifferentemente nella parte superiore o inferiore del centralino (fam. 654). |
 |
STRUCTURAL CHARACTERISTICS
......................................................................................................................................................
- Stainless steel quick-turning screws for festeing down the cover.
- EN50022 rails adjustable vertically
- Provision for installing 125 A moulded-case circuit breakers fitted on DIN rails.
- Distance between the rails: 150mm
- Lockable and sealable tinted window (closing by simple pressure)
- Knockouts on all sides:
top 3: PG 21 - PG 29 - PG 36
bottom 3: PG 21 - PG 29 - PG 36
sides: drilling points provided.
Ample space ahead of and after the EN 50022
rail foe easy wiring
- Wires can run under the EN50022 rail for easy connection.
- Provision for mounting a 24V~ 300 VA (SELV) safety transformer.
 .
- Provision for fitting the higes on the right or on the left side of the unit.
- Surface mounting with fastening from the inside or from the rear with support (the base may also be embedded in the wall).
- Provision for carrying handle.
- Rear cover chequered with 10x10 mm squares for fast centring of any appliance mounted by means of self-tapping screws.
- The modules may be coupled together using PG 36 couplers on all sides.
- Draining holes at two ends (top and bottom).
 |
 |
DIN rail (EN50022):
can be placed on different levels. |
Enclosures with cutouts
674.1000 + 674.1200
or 672.1200 |
|
Socket
interlocked
OMNIA Series
fam. 400 (IP44)
fam. 405 (IP67) |
 |
|
Consumer units single
572.0120 |
Installation with
6 DIN modules
and interlocked switch socket outlet |
TECHNICAL CHARACTERISTICS
......................................................................................................................................................
- Protection degree IP66 to IEC529 and EN 60529
- Non-ageing elastomer seals.
- Double insulation
 (use the bottom insulating caps supplied)
- Made of halogen-free self-extinguishing thermoplastic material. RAL 7035 gray, abnormal heat and fire resistant up to 650° C (glow-wire test to IEC 695-2-1)
- Dimensional stability incontinuous operation from -20°C to +85°C.
- Resistance to chemicals (weter, saline solutions, acids, bases, mineral oils) and weathering.
- Resistenza agli agenti chimici (acqua, soluzioni saline,
- Reference standard IEC 670
- The units are approved for the execution of assemblies to EN 60439-1 and EN 60439-4
| The semi-transparent tinted window, lockable and sealable. To open it, just lower the handle provided, snap-closing |
 |
ACCESSORIES
......................................................................................................................................................
- Neutral and earthing terminal blocks to IEC 998-1 and IEC 992 consisting of 3 35-mm2 and 10 16mm2 terminals - IP20
- Terminal block for R, S, T phases to EC 998-1 and IEC 998-2 consisting of 2 35mm2 and 6 16mm2 terminals - IP20 )
(the two terminal blocks may be fitted either in the upper or in the lower part of the consumer units)
- Self-adhesive label for circuit identification.
- 4 DIN modules covers.
- Blank plate to cover unused cutouts.
- Carryng handle (not supplied).
- Zinc plate mounting plates measuring 110x275 and 180x275 (mm)
- Triangular key.
654.0070
Metallic YALE lock
fam. 654 |
654.0090
Ridged profile for
DIN rail
(h 18 mm)
fam. 654
|
654.0030
Cover
sealing
fam. 654
|
. |
-
