Scame Homepage Homepage
 
 
 
Locator: HOME > Product > Product sub-division | block.asp
Catalogo

   



BLOCK Series
DISTRIBUTION ASSEMBLIES - IP66
......................................................................................................................................................

Scame General catalogue:
sez. 3.1: Distribution assemblies
Products:
fam. 630: Portable
fam. 632: Surface mounting


GENERAL DESCRIPTION
......................................................................................................................................................

BLOCK Series distribuction assemblies have a very compact size and can therefore supply a restricted number of small to medium appliances.
BLOCK Series distribution assemblies are made of thermoplastiqc material DOMINO and feature the same versatility and performance as the DOMINO Series. The pre-wired versions can be used on construction sites as well, since they meet the requiresement of the EN60439-4 standard for construction site distribution assemblies.

VERSIONS
......................................................................................................................................................

They come in tree sizes (WxHxD):
BLOCK 1 - 110x280x95 mm
BLOCK 3 - 136x440x114 mm
BLOCK 4 - 212x415x114 mm

Installation:
- surface mounting
- panel mounting
- mobile on appropriate stand
- portable with cable and plug

Capacity:

BLOCK 1 distribution assemblies
1 IEC309 16A or EUREKA Series 16A/32A socket outlets, or
1 10A/16A domestic type socket outler

BLOCK 3 distribution assemblies
3-4 IEC309 or EUREKA Series 16A socket outlets, or
2-3 IEC309 or EUREKA Series 16A and 1 32A socket outlet, or
3-4 10A, 16A domestic type socket outlets or any
combination of the above.

BLOCK 4 distribution assemblies
4 IEC309 or EUREKA Series 16A socket outlets, or
2 IEC309 or EUREKA Series 16A and 2 32A socket outlets or
4 10A/16A domestic type socket outlets or
any combination of the above.

 

This range of possible combinations of the socket outlets provides outstanding versatility.

Both versions are available empty.The front panel may be blank or provided with cut-outs.

The cut-outs accept SCAME sockets with 70x87 mm flanges.

TECHNICAL CHARACTERISTICS
......................................................................................................................................................

  • Casing made of impact-resistant, self-extinguishing RAL 7035 gray engineering plastic.
  • IEC 309 plugs and socket outlets made of impact-resistant, self-extinguishing material, approved by IMQ and other European quality marsk.
  • 10/16A domestic socket outlets approved by IMQ CEI 23-5 e CEI 23-16 approvate IMQ
  • Protective gear (MCBs,RCDs or RCBOs) or control gear housed inside the cabinet in a separate compartement, fitted with a DIN rail and covered with a clear tinted window ehich locks with a triangular key.
  • H07RN-F rubber cables approved by IMQ <HAR>
  • IP44 and IP66
  • Double insulation .
  • Conformity to standards:
    IEC 670, (empty enclosures),
    EN60439-1 (all versions)
    EN60439-4 (portable versions)
Scame
BLOCK 3 Series
Scame
BLOCK 4 Series

APPROVALS
......................................................................................................................................................

BLOCK Series distribution assemblies have been tested for conformity to EN 60439-4 CEI EN60439-4 (1992) at the Italian Electrotechnical Testing Centre (CESI), with results.

APPLICATIONS
......................................................................................................................................................

Construction sites, industrial, agricultural and businees facilites, churches, places open to the public in general, DIY rooms.

Scame
Series BLOCK 3:
built-in foldaway handle
Scame
Series BLOCK 4:
metal stand

CONSTRUCTION
......................................................................................................................................................

modular gear contained:
- In the BLOCK 1 enclosure: up to 4 DIN modules
- In the BLOCK 3 enclosure: up to 6 DIN modules
- In the BLOCK 4 enclosure: up to 10 DIN modules

Extra low voltage:
A 150VA or 300VA isolating transformer with 220-250/24V ratio can be fitted in the BLOCK 4 distribution assembly for the supply of safety extra low voltage (SELV).

Knock-out holes to drain out the condensate.
All version with pre-fitted cable clamps.
Built-in foldaway handle.
PG 13.5 knock-out hole for lateral incoming cable (with concentric knock-out for PG 21); two PG 21 inlet knock-outs on the bottom.

Enclosures designed for surface mounting and panel mounting by means of appropriate fittings at the back of the enclosure.

A screw cap, PG 13.5 nut and lock are supplied as accessoires. Tinted window with one locking knob on BLOCK 3 and two on BLOCK 4 distribution assemblies. The knob can be replaced by a triangular lock that is included in the accessories kit.

BLOCK 3 and BLOCK 4 distribution assemblies have been designed to meet the IEC670, standard. Compliance of the empty enclosures, without sockets or devices, is affirmed by the IMQ quality mark..

The pre-wired versions meet the requirements of EN 60439-1 and EN 60439-4 standards, as declared in the certificates of conformity enclosed.

All the sockets bear the IMQ quality mark. 

When the cover is locked, the protection degree is IP44 o IP66, depending on the version.

All the units may be surface or panel mounted:

  • for surface mounting there are 4 knock-out slots, instead of holes, to make installation easier. Double insulation is provided by special screw caps supplied, which simply press in.
  • for panl mounting 4 bosses are provided on the rear.

 

ScameCable inlet is through a PG 13.5 or PG 21 lateral knockout, like those on the bottom. The cable clamp can be fitted in two positions according to cable size and prevents the feeder cable from being unduly stressed by pulling or twisting.

The window which covers the switches is locked by means of a knobs for BLOCK 4. It is possible to replace the knob with a triangular loking CEI 64-8.

A pratical catch holds the window open when the switches need to be accessed.

 

ScamePORTABILITY
..................................................................................

All BLOCK Series distribution assemblies can be carried easily by means of a convenient foldaway handle.

The handle is built-in and does not required any screws for mounting.

An appropriate device for carryng such units is expressly prescribed by EN 60439-4, IEC 439-4.

MATERIALS
......................................................................................................................................................

ScameBoth the base and the cover of BLOCK Series enclosures are made of thermoplastic material with the following characteristics:

  • heat and flame resistance to IEC 670 standards regarding containers for electrical uses and according to self-extinguishing tests carried out to IEC 695-2-1 e CEI 50-11
  • high impact resistance even at low temperatures;
  • excellent electrical insulation, high dielectric characteristics, outstanding resistance to creep currents;
  • excellent resistance to extremities of temperature and low thermal dilation;
  • service temperature range from -25°C to +90°C
  • excellent resistance to diluted mineral acids, alkaline solutions, alcohol, greases and mineral oils;.
  • good resistance to ageing.


CATALOGUE:
PRODUCT SERIES
................................................................................................................................................................

News   Description Catalogue
  BLOCK Series  Distribution assemblies for generic use Go to catalogue: Product catalogue: BLOCK Series

All product series

 

 

CATALOGUE:
PRODUCTS SUB-DIVISIONS
................................................................................................................................................................

News   Families Description Products sub-divisions
  630 BLOCK Series - Portable combination units Group D1: Gruppo: D1
  632 BLOCK Series - Surface mounting combination units Group D1: Gruppo: D1
  749 ROLLER-BLOCK 450 Series - 30/50m, wheeled stand Group C5: Gruppo: C5

All products sub-divisions

 

 

InfoTECH
SERIES TECHNICAL SHEETS
................................................................................................................................................................

Reference Description Language Size Download
BLK-GB-10 BLOCK Series
Distribution assemblies
English 773 kb

All series technical sheets

 

 

VIDEO & MULTIMEDIA
................................................................................................................................................................

Ref. Description Language     See
BLK-GB-1 BLOCK Series
IP66 distribution assemblies "Practicality and comfort at your service"
- 60'' -
EN  

All video

 

 

NEWS
................................................................................................................................................................

  The last one from ScameOnLine
8/7/2011
New BLOCK5 Series panels

5/7/2011
BLOCK4 Series panels for 6 outlets (2+4)

20/2/2009
New version of the BLOCK Series distribution panel

18/9/2007
Versions for the BLOCK Series of distribution assemblies

30/3/2007
News: BLOCK4 Series with yale lock

All news

 

 

PHOTO GALLERY:
SOME INTERESTING PROJECT
................................................................................................................................................................

  Projects
Visit the official site
KIA Motors Factory Group(Zilina - Slovacchia)

Visit the official site
NORDELTA – Residential Centre – “First ciudad pueblo de la Argentina” (30 Km from Buenos Aires – Argentina)

High Speed Train-Line TAV (Italy)

All projects

 

 

PHOTO GALLERY:
SOME INTERESTING APPLICATIONS
................................................................................................................................................................

  Applications
Electrification of a Turret by a small Port in north Europe

BLOCK Series Panel's Installation on a Turret

Officine's Application for Working-desk and Maintenance

All applications

 

 

Rev.11.1109      

 

Share
 
 
Search
Search code:
Search text:
 
Utility
Discover how to find in thousands configurations, the Combination unit for you.
Identifies the products compatible with Scame material .
 
 
Advertising
 

 

 

 
 
  Search - Language [EN] - Site Map - Contact - Privacy - Legal Notice ©2005-2014 SCAME PARRE S.p.A. - P.IVA IT 00137900163  
Back    Print    Active users: 136