4-WAY ADAPTORS Series

ADAPTORS FOR INDUSTRIAL APPLICATIONS

	Catalogueo: sez. 3.2: Adaptors for industrial applications
	Products: fam. 621: 3/4 sockets with cable fam. 623: 3/4 sockets without cable fam. 625: 3/4 sockets foe elevated inst.

GENERAL DESCRIPTION
......................................................................................................................................................

This adaptor is designed for four IEC 309 or domestic socket outlets, and it is fitted with a cable gland and a carryng handle.

Either four 16A and two 32A angled sockets can be mounted in the four holes provided in the casing or combinations with domestic socket outlets (Unel, Italian, French or British standard).

Its compact structure enables it to withstand impact well and it may even be set on the floor.

Rated voltage: from 200V to 415V.

AVAILABLE VERSIONS
......................................................................................................................................................

• With cable and plug - IP44 and IP66
  Without cable and plug - IP44 and IP66
  For elevated installation - IP44 and IP66
  
• Empty (without sockets)
  to be cabled - IP66(maxinum)

TECHNICAL INFORMATION
......................................................................................................................................................

• Shock-proof, self-extinguishing casing made of thermoplastic material. RAL7035 gray.
• IEC309 plugs and sockets with IMQ and other European standard approvals.
• H07RN-F wear-resistant rubber cable with IMQ-HAR approval,rated voltage 450/750V
• IP44 and IP66 protection degrees
• Double insulation
• Zinc-plated steel handle for carrying and suspension
• Provision for elevated installation
• PG21 cable inlet
• Screw-down cable clamp
• T140 terminal block with 450V~ rated voltage

In all installations where the power supply must come from above (for example in the workshops of carpenters or other trade workers), the adaptor can be hung from its handle by a chair or metal cable. In this way mechanical tensile stresses are not passed onto the electrical supply cable.