3-WAY ADAPTORS Series
with protection devices

ADAPTORS FOR INDUSTRIAL APPLICATIONS

	General catalogue: sez. 3.2: Adaptors for industrial applications
	Products: fam. 621: 3/4 sockets with cable fam. 623: 3/4 sockets without cable fam. 625: 3/4 sockets for elevated inst.

GENERAL DESCRIPTION
......................................................................................................................................................

This adaptor is designed for three IEC 309 or domestic sockets and includes a DIN module compartment for housing the protection devices (up to 6 DIN modules). The switch compartment is protected by a window whitch locks with a key or a knob.

The casing is fitted with a cable gland and a carrying handle.

Either three 16 A or two 16 A plus one 32 A sockets in conformity to IEC 309 standard may be fitted, or combinations with 16 A sockets for domestic use (Unel, British, Italian or French standard).

With its compact size, it may even be set on the floor.

Rated voltage: from 200V to 415V.

AVAILABLE VERSIONS
......................................................................................................................................................

• Protection device: MBC
  With cable and plug - IP44 and IP66
  Without cable and plug - IP44 and IP66
  For elevated installations - IP44 and IP66
  
• Protection devices: MCB+RCD
  With cable and plug - IP44 and IP66
  Without cable and plug - IP44 and IP66
  For elevated installations - IP44 and IP66
  
• Empty (Without sockets and switches)
  to be cabled - IP66 (maxinum)
  

NOTE:
MCB = Miniature Circuit Breaker
RCD = Resident Current Device

THECNICAL INFORMATION
......................................................................................................................................................

• Impact-resistant, self-extinguishing casing made of thermoplastic material. RAL7035 gray
• IEC309 plugs and ockets with IMQ and other European standard approvals
• Protection switches with IMQ and other European standard approvals
• H07RN-F wear-resistant rubber cable with IMQ-HAR approval, rated voltage 450/750 V
• IP44 and IP66 protection degrees
• Double insulation
• Zinc-plated steel handle for carrying and suspension.
• Provision for elevated mounting
• PG21 cable inlet
• Screw-down cable clamp
• T140 earth terminal bloc with 450V~ rated voltage

Handle and cable gland not supplied for elevated-installation versions. The cable inlet is from below, where the adaptor is fastened to the stand.