2-WAY ADAPTORS Series
with interlocked-switch
socket outlets
INDUSTRIAL ADAPTORS
 |
General catalogue:
sez. 3.2: Adaptors for industrial applications |
Products:
fam. 612: 2 interlocked-switch socket IP44
fam. 614: 2 interlocked-switch socket IP66 |
GENERAL DESCRIPTION
......................................................................................................................................................
The adaptor consist of an assembly of two unfused interlocked-switch socket outlets and is designed for use wherever interlocked-swich socket outlets are required in conformity whith prevailing safety regulations.
The casing is fitted with a cable gland and carryng handle.
It is available with outlets of different configurations and is either pre-wired with cable and plug and ready to use, or without cable if designed for fixed installation.
The appliance is designed for 16A and 32A rated current and voltage from 100V to 415V. AVAILABLE VERSIONS
......................................................................................................................................................
- With cable and plug - IP44 and IP66
- Without cable - IP44 and IP66
TECHNICAL INFORMATION
......................................................................................................................................................
- Casing made of impact-resistant, self-extinguishing thermoplastic material coloured RAL7035 gray
- IEC309 plug and sockets with IMQ and other European standard approvals
- H07RN-F were-resistant rubbed cable with IMQ-HAR approval, rated voltage 450/750V
- IP44 and IP66 protection degrees
- Double insulation

- Zinc-plated steel handle for carryng and suspension
- PG21 cable inlet
- Screw-down cable clamp.
- T140°C teminal block with 450V~ rated voltage
The switch can be padlocked
in either the open
or closed position. The rated
current is 16A or 32A
 |
|

The metal handle masckes is
much easier to carry the adaptor
and allows it to be hung up
using well-placed hooks. |
|