SCAME PLUGS AND SOCKETS FOR INDUSTRIAL APPLICATIONS

• The cable ends to be fitted into the terminals of the plugs and sockets must be carefully prepared to ensure that the requisite clearance is observed.
• Tighten the screws of the terminals to avoid overheating. Loose screws might cause fire hazards or damage to the cables.
• Inspection and replacement of plugs and sockets should be carried out only by suitably qualified persons.
• Replace any plugs or sockets that show signs of damage (eg. burn marks). Plugs and sockets should be checked regularly, especially at the cable connection points.
• Plugs or sockets which have suffered impact or shock of any kind should be checked carefully, even if there are no visible signs of damage.

INDEX

General catalogue:
Section 2.2: Plugs and sockets for industrial applications
Section 2.3: Interlocked switch socket outlets