THE WORLD
OF SCAME

Italy

Parre (Bergamo)

Please, select your language

Search product


Navigator

   
DETAILS OF TECHNICAL STANDARDS

EN 61851-1

Electric vehicle conductive charging system
Part 1: General requirements

YEAR FILE EDITION SCAME
2011 N185
       

European Standard

 

Contents
(courtesy CENELEC)

Applies to on-board and off-board equipment for charging electric road vehicles at standard a.c. supply voltages (as per IEC 60038) up to 1 000 V and at d.c. voltages up to 1 500 V, and for providing electrical power for any additional services on the vehicle if required when connected to the supply network.

It includes characteristics and operating conditions of the supply device and the connection to the vehicle; operators and third party electrical safety, and the characteristics to be complied with by the vehicle with respect to the a.c./d.c. EVSE, only when the EV is earthed.
This second edition cancels and replaces the first edition published in 2001.

It constitutes a technical revision.
The main changes with respect to the first edition of this standard are:
- revision of connector definitions and current levels (Clause 8);
- modification definition of pilot wire to pilot function;
- division of Clause 9 to create Clauses 9 and 11;
- Clause 9: specific requirements for inlet, plug and socket-outlet;
- Clause 11: EVSE requirements: the basic generic requirements for charging stations;
- renumbering of annexes;
- deletion of previous Annex A and integration of charging cable requirements into new Clause 10;
- Annex B becomes Annex A and is normative for all systems using a PWM pilot function with a pilot wire; Annex C becomes Annex B;
- replacement of previous Annex D (coding tables for power indicator) with B.4 in Annex B using new values;
- new informative Annex C describing an alternative pilot function system.

This publication is of high relevance for Smart Grid.

 



Active







"CROSS REFERENCE"
by SCAME


The main Standards
related to EN 61851-1


 

Corresponding European standards
No data available
 
Corresponding International standards
IEC 61851-1Electric vehicle conductive charging system
Part 1: General requirements
 
Organizations and Institutions
CENELECEuropean Committee for Electrotechnical Standardization
[European Standard]
 
Other related CENELEC Standards
EN 61851-1 Electric vehicle conductive charging system
Part 1: General requirements
EN 61851-23 Electric vehicle conductive charging system
Part 23: DC electric vehicle charging station
EN 62196-1 Plugs, socket-outlets, vehicle couplers and vehicle inlets
Conductive charging of electric vehicles
Part 1: Charging of electric vehicles up to 250 A a.c. and 400 A d.c.
EN 62196-2 Plugs, socket-outlets and vehicle couplers
Conductive charging of electric vehicles
Part 2: Dimensional interchangeability requirements for a.c. pin and contact-tube accessories
 
Thematic collection
Electric Vehicle

 


Back to index











The "Suggestion"
by SCAME


The main Scame products
related to the requirements of the standard EN 61851-1


 

DOMINO IP66 Series
for generic use


DOMINO System
Modular systems for distribution assemblies and consumer units


LIBERA Series
Connettori per veicoli elettrici


MBOX Series
for construction site



See also the
GENERAL CATALOGUE

 

Rev.17.0206      

 

Share
 
 
 
Search
Text:
Code:
Description:
 
 
Utility
Discover how to find in thousands configurations, the Combination unit for you.
Identifies the products compatible with Scame material.
 
 
Advertising
 

 
 
 
 

Search - Language [] - Site Map - Contact - Privacy - Legal Notice
©2005-2017 - SCAME PARRE S.p.A. - P.IVA IT 00137900163 - Active users: 627